Cotech 30-7901 Handleiding
Cotech
Slijpmachine
30-7901
Lees hieronder de đź“– handleiding in het Nederlandse voor Cotech 30-7901 (64 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/64
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Art.no. Model
18-3022 BDS46-UK
30-7901 BDS46
ENGLISHSVENSK ANORSKSUOMI
Belt Grinder
Bandslipmaskin
BĂĄndslipemaskin
Nauhahiomakone
Ver. 200810
3
ENGLISH
Belt Grinder
Art. no: 18-3022 Model: BDS46-UK
30-7901 BDS46
Please read the entire instruction manual before using and save it for future use. We apologise for any text
or photo errors and any changes of technical data. If you have any questions concerning technical problems
please contact our Customer Service Department (see address on reverse).
General safety instructions
Warning! When using this tool fundamental safety measures must be observed to decrease the risk of î› re,
electric shock and personal injury. Read all of these instructions before using the product and save for
future reference.
1. Keep the workplace clean.
Cluttered areas and work tables could cause accidents.
2. Take the working environment into consideration.
- Do not expose the machine to rain.
- Do not use the machine in damp or wet areas.
- Keep the working area well-lit.
- Do not use the machine in the proximity of inammable liquids or gases.
3. Avoid electric shocks.
Avoid physical contact with earthed objects such as water pipes, radiators, kitchen cookers and fridges.
4. Keep everyone at a distance.
Do not let anyone, especially children, who is not participating in the work touch the tool or any of the
extensions. Keep everyone at a distance from the work place.
5. Store the machine in a safe place.
When the tool is not being used, store it in a dry, locked place out of the reach of children.
6. Do not force the machine.
It carries out the job more efî› ciently and safely at the intended feed speed.
7. Use the correct machine.
- Do not force small machines to do large jobs which require more powerful machines.
- Do not force a tool or auxiliary equipment to carry out work for which it is not designed; e.g. do not
use a circular saw to cut down branches or timber.
8. Wear suitable clothing.
- Do not wear any loose clothing or jewellery as they can get caught in rotating parts.
- When working outdoors, non-slip shoes are recommended.
- Wear a hairnet (or similar) if you have long hair.
9. Always wear safety goggles.
Use a protective mask if the work creates a lot of dust.
10. Use dust collecting equipment.
If it is possible to attach a dust collector to the machine, ensure that it is î› tted and used properly.
11. Do not manhandle the power cable.
Instead of tugging at the cable, disconnect it by pulling the plug out of the socket. Ensure that the power
cable does not come into contact with heat, oil or sharp edges.
12. Ensure that the workpiece is securely fastened.
When possible, use clamps or a vice to secure the workpiece. That is safer than holding the workpiece
with one hand.
13. Do not overreach.
Ensure that you stand safely and with good balance at all times.
14. Keep the machine in good working order.
Ensure that they are clean and that the cutting edges are sharp for an optimal and safe result. Follow
the recommendations in the manual regarding lubrication and change of î› ttings. Check the power cable
regularly. If it is damaged it should be changed by a qualiî› ed service technician. Check all extension
cables regularly to ensure that they are not damaged. Ensure that the handles and controls of the
machinery/tools are dry, clean and completely free from oil, grease etc.
Product specificaties
| Merk: | Cotech |
| Categorie: | Slijpmachine |
| Model: | 30-7901 |
Heb je hulp nodig?
Als je hulp nodig hebt met Cotech 30-7901 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Slijpmachine Cotech
13 Juni 2023
31 Mei 2023
2 Mei 2023
18 April 2023
1 April 2023
19 Maart 2023
6 Maart 2023
Handleiding Slijpmachine
- Slijpmachine Bosch
- Slijpmachine AEG
- Slijpmachine DeWalt
- Slijpmachine ABB
- Slijpmachine Adler
- Slijpmachine Aquapur
- Slijpmachine ATI-ZDL
- Slijpmachine Batavia
- Slijpmachine Bavaria
- Slijpmachine Bort
- Slijpmachine Bruder Mannesmann
- Slijpmachine Bunn
- Slijpmachine Defort
- Slijpmachine Dolmar
- Slijpmachine Dolmar(Makita)
- Slijpmachine Dremel
- Slijpmachine Duro
- Slijpmachine Einhell
- Slijpmachine Ergofix
- Slijpmachine Fein
- Slijpmachine Felisatti
- Slijpmachine Ferm
- Slijpmachine Festool
- Slijpmachine Flex
- Slijpmachine Florabest
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Gorenje
- Slijpmachine Gude
- Slijpmachine Gude Pro
- Slijpmachine Hikoki
- Slijpmachine Hitachi
- Slijpmachine Holzmann
- Slijpmachine Husqvarna
- Slijpmachine Hyundai
- Slijpmachine Kawasaki
- Slijpmachine Kress
- Slijpmachine Maestro
- Slijpmachine Makita
- Slijpmachine Maktec
- Slijpmachine Max
- Slijpmachine Mesko
- Slijpmachine Metabo
- Slijpmachine Milwaukee
- Slijpmachine Parkside
- Slijpmachine Pattfield
- Slijpmachine Powerfix
- Slijpmachine Powerplus
- Slijpmachine Ryobi
- Slijpmachine Scheppach
- Slijpmachine Silvercrest
- Slijpmachine Silverline
- Slijpmachine Skil
- Slijpmachine Solo
- Slijpmachine Stanley
- Slijpmachine Stomer
- Slijpmachine Tanaka
- Slijpmachine Toolcraft
- Slijpmachine Toolland
- Slijpmachine Trotec
- Slijpmachine United Office
- Slijpmachine Vonroc
- Slijpmachine Westfalia
- Slijpmachine Workzone
- Slijpmachine Worx
- Slijpmachine Ozito
- Slijpmachine Black And Decker
- Slijpmachine ECG
- Slijpmachine Steren
- Slijpmachine Cocraft
- Slijpmachine Meec Tools
- Slijpmachine Yamato
- Slijpmachine Genesis
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Nuova Simonelli
- Slijpmachine Power Craft
- Slijpmachine Truper
- Slijpmachine Fieldmann
- Slijpmachine Mirka
- Slijpmachine Proxxon
- Slijpmachine Malmbergs
- Slijpmachine Porter-Cable
- Slijpmachine Graphite
- Slijpmachine RIDGID
- Slijpmachine Sthor
- Slijpmachine Craftsman
- Slijpmachine Rikon
- Slijpmachine Chicago Pneumatic
- Slijpmachine Alpha Tools
- Slijpmachine Hazet
- Slijpmachine Yato
- Slijpmachine Baumr-AG
- Slijpmachine Meister Craft
- Slijpmachine Neo
- Slijpmachine Victoria Arduino
- Slijpmachine SW-Stahl
- Slijpmachine Einhell Bavaria
- Slijpmachine Gladiator
- Slijpmachine Rodcraft
- Slijpmachine Bavaria By Einhell
- Slijpmachine Classic Power
Nieuwste handleidingen voor Slijpmachine
18 April 2024
17 April 2024
17 April 2024
10 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024