Corsair AX1200i Handleiding

Corsair Niet gecategoriseerd AX1200i

Lees hieronder de 📖 handleiding in het Nederlandse voor Corsair AX1200i (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 105 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15

Corsair Link v2.4 Manual

Inial Set- up

Placing devices within the chassis

When you rst start up Corsair Link, there will be a list of auto-detected devices on the left column. You can drag and

drop the devices listed from the le-hand side of the screen and place them anywhere on the chassis.

To do this, simply left-click and hold on the device you wish to move, and then drag and drop the icon to the locaon

you wish to place it. It may help you for ease of use later to group devices and their associated funcons in the

approximate locaon of that device within the chassis. For example, place the CPU device and monitoring tools

where the CPU exists within the case.

You do not have to use the default chassis image and can change this to a range of pre-loaded images. To change the

background image of the chassis, double or right click anywhere on the chassis image and then select a new image

from the list that appears. You can also upload your own, with the Upload a Custom Image funcon. “ ”

Changing device properes

Temperature Se o Conguraon ns r

To change the properes of any device or monitoring funcon, simply right click or double click on any device icon.

This will bring up the properes window on the right hand side. Here you can change the properes of the device

using the drop down menus. You can see here we are adjusng the conguraon for Cooling Temp 1. These devices

can also be renamed.

Device Conguration

Because some motherboards report RPM speeds dierently depending on the chipset being used, it may be

necessary to set a speed divider for the pump RPM as needed. If the RPM seems abnormally high or low compared

to what you have, enable the speed divider.

Fan Conguraon

Selecng a fan will enable several opons in the drop down menus on the right hand panel

1. Low Noise - If you require your system to be as quiet as possible, select Quiet mode to run the fan at low

speeds regardless of the temperature. This will result in very low noise levels but higher temperatures.

Product specificaties

Merk:	Corsair
Categorie:	Niet gecategoriseerd
Model:	AX1200i
Kleur van het product:	Zwart
Gewicht:	4600 g
Breedte:	150 mm
Diepte:	200 mm
Hoogte:	86 mm
Geluidsniveau:	- dB
Gewicht verpakking:	4800 g
Gebruikershandleiding:	Ja
Type verpakking:	Doos
Aan/uitschakelaar:	Ja
Land van herkomst:	China
Afmetingen verpakking (BxDxH):	394 x 228 x 152 mm
Bedoeld voor:	PC
Aantal ventilatoren:	1 ventilator(en)
Stroomspanning bescherming:	Over current, Over voltage, Short circuit, Under voltage
80 PLUS certificatie:	80 PLUS Platinum
Veiligheid:	cTUVus, CE, CB, FCC Class B, TÜV, CCC, C-tick
Mean time between failures (MTBF):	2000000 uur
Totaal vermogen:	1200 W
Afmetingen (B x D x H):	150 x 200 x 86 mm
Type koeling:	Actief
Efficientie:	92 procent
Producten per pallet:	60 stuk(s)
AC-ingangsspanning:	90 - 264 V
Ventilator diameter:	140 mm
Aantal poorten:	39
EPS power connector (8-pin):	Ja
Peripheral (Molex) power connectors (4-pin):	12
Vormfactor van de voeding (PSU):	ATX
Power Factor Correctie (PFC) type:	Actief
Maximale ingangsstroom (@110V):	+12V, +3.3V, +5V, +5Vsb, -12V A
Gecombineerd vermogen (+3.3V):	180 W
Gecombineerd vermogen (+12V):	1204.8 W
Gecombineerd vermogen (+5V):	180 W
Max huidige output (+3.3V):	30 A
Max huidige output(+12V):	100.4 A
Max huidige output (+5V):	30 A
Max huidige output (-12V):	0.8 A
Max huidige output (+5Vsb):	3.5 A
Gecombineerd vermogen (-12V):	9.6 W
Gecombineerd vermogen(+5Vsb):	17.5 W
Aantal SATA power connectors:	16
Floppy drive power connector:	2
ATX version:	2.31
EPS version:	2.92
Ventilator locatie:	Boven
PCI Express connector:	Ja