Conceptronic EMRICK12B Handleiding

Conceptronic Niet gecategoriseerd EMRICK12B

Bekijk gratis de handleiding van Conceptronic EMRICK12B (11 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 4.8 sterren uit 30.5 reviews. Heb je een vraag over Conceptronic EMRICK12B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/11

Quick Installation Guide

EMR CK1I 2B

Schnellinstallationsanleitung

Guide d'Installation Rapide

Guía de Instalación Rápida

Guida di Installazione Rapida

Gyors Telepítési Útmutató

Szybka Instrukcja Instalacji

Guia de Instalação Rápida

SPECIFICATIONS

Bus Interface

PCI Express-

Connector

4 x Serial RS232 (DB9)

System Requirements

◼ Windows XP/Vista/7/8/10/11

◼ Available PCI Express p2-x1 slot

Operating Temperature

-10°C ~ 55°C

Storage Temperature

-40°C ~ 70°C

Relative Humidity

5~95% RH ( ) no condensation

Dimensions

85 69 x x 3 mm

Weight

250g

Features

◼ 1. Compliant with PCI Express 2.0 Gen

◼ - -Express End-point controller with PHY integrated. Single lane (x1) PCI

◼ . Compliant with PCI Power Management 1.2

◼ -chip -byte depth FIFO in transmit, receive path of each On 256 port.

◼ control. Supports hardware and software flow

◼ (up to 115200bps) on all serial ports. Supports Slow IrDA mode

◼ 5 6 7 9-bit serial format. Supports , , , 8 and

◼ management features. Supports remote wakeup and power

Package Contents

◼ EMRICK12B

◼ Driver CD

◼ L ow profile bracket

◼ Quick Installation Guide

English

Congratulations on the purchase of your Conceptronic EMRICK12B.

When problems occur, we advise you to visit our support site (go to www.conceptronic.net

and click on 'Support'). If you have other questions about your product and cannot find it on

our website, please contact us at support@conceptronic.net.

For more information about Conceptronic products, please visit the Conceptronic website:

www.conceptronic.net.

Installation & usage

◼ Turn Off the power to your computer.

◼ s cover. Unplug the power cord and remove your computer’

◼ available PCIe slot. Remove the slot bracket from an

◼ s bus connector with the selected PCIe slot on To install the card, carefully align the card’

the motherboard. Push the board down firmly.

◼ s holding screw to secure the card. Replace the slot bracket’

◼ Replace the computer cover and reconnect the power cord.

Your computer will show the “New Hardware Wizard” on your screen. You can ignore this

“New Hardware Wizard” by clicking “Cancel”.

◼ -ROM in the optical drive of your computer. The AutoPlay option will be Insert the CD

shown automatically. Click on “Run Autorun.exe”to start the autorun menu.

◼ and follow the onscreen instructions to install the required Select “Install Drivers”

drivers for the serial PCIe card.

◼ When the driver installation is complete, restart your computer to ensure the drivers are

correctly loaded.

Safety & Warnings instructions

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling in this

manual, we assume no liability for any resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

◼ Keep the device away from water, humidity, fire or hot environments.

◼ Keep your device and all its parts and accessories out of the reach of small children.

◼ carelessly. This may become Do not leave the packaging material lying around

dangerous playing material for children.

◼ Avoid dropping, throwing or crushing the device.

◼ Do not open, change or damage the device.

◼ Disconnect the product from the mains before cleaning.

◼ -free cloth. Clean the product with a dry, fibre

Disposal of waste electrical equipment: the product at a Dispose of

recycling point. Do not dispose together with household waste. Incorrect of

storage/disposal can harm the environment and/or cause injury.

CE marking:/ UKCA Conceptronic declares that this product

complies with the directives listed in the section 'Declaration of

Conformity'.

Product specificaties

Merk:	Conceptronic
Categorie:	Niet gecategoriseerd
Model:	EMRICK12B
Kleur van het product:	Zwart
Gewicht:	250 g
Breedte:	85 mm
Diepte:	69 mm
Hoogte:	3 mm
Breedte verpakking:	172 mm
Diepte verpakking:	140 mm
Hoogte verpakking:	75 mm
Type verpakking:	Doos
Land van herkomst:	China
Soort serieële aansluiting:	RS-232
Duurzaamheidscertificaten:	CE, RoHS
Temperatuur bij opslag:	-40 - 70 °C
Intern:	Ja
Naleving van duurzaamheid:	Ja
Ondersteunt Linux:	Ja
Snelle installatiehandleiding:	Ja
Hostinterface:	PCIe
Meegeleverde drivers:	Ja
Seriële poort(en):	4
(Buitenste) hoofdverpakking hoogte:	350 mm
(Buitenste) hoofdverpakking breedte:	490 mm
(Buitenste) hoofdverpakking brutogewicht:	10000 g
(Buitenste) hoofdverpakking lengte:	380 mm
Hoeveelheid per (buitenste) hoofdverpakking:	25 stuk(s)
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	8471800000
Pallet brutohoogte:	1630 mm
Pallet brutobreedte:	1200 mm
Pallet brutolengte:	800 mm
Aantal (buitenste) hoofdverpakkingen per pallet:	30 stuk(s)
Uitbreidingskaartstandaard:	PCIe 2.0
FIFO (First In, First Out):	256 B
Output interface:	RS-232