Computherm DF230 Handleiding
Pagina's 1 Niet gecategoriseerd
Bekijk de handleiding van Computherm DF230 gratis online of download de PDF. Deze handleiding is 5 keer bekeken. Vraag over dit model? Stel een vraag
The valve actuator is 2-point controlled and is electro-thermally operated. It opens/closes
the valve in response to 230V voltage. The open or closed position of the valve is indicated
by the axial displacement/position of the grey pin located on the front panel of the actuator.
The simple electro-thermal construction ensures reliable operation and low energy
consumption.
With factory default setting and in its non-voltage state the actuator keeps the valve closed,
while it opens the valve when voltage is applied. In closed position the pin sinks into the
front panel, in opened position the pin raises some millimeters above the front panel.
The
COMPUTHERM
DF-230 valve actuator is provided with a relieving toggle, that
should be removed after installation. In case of longer shotdown the relieving toggle
should be placed back to prevent the sticking of the actuator. The removing and
replacing of the toggle should be done in opened position.
ATTENTION! The actuator should be installed in dry place, protected from dripping
water.
ATTENTION!The device must be installed and connected by a qualified professio-
nal.
WARNING!Modifying the product can cause electric shock or products failure.
The
COMPUTHERM
DF-230 type valve actuator complies with the require-
ments of standards EU EMC 2004/108/EC; LVD 2006/95/EN and RoHS
2011/60/EU.
COMRMPUTHE
COMPUTHERM
COMPUTHERM
Operating instructions
DF- 230 valve actuator
Technical data:
Manufacturer: QUANTRAX Kft.
Fülemüle u. 34., Szeged, H-6726, Hungary
Tel: +36 62 424 133 • Fax: +36 62 424 672
Email: [email protected]
www.quantrax.hu
www.computherm-hungary.hu
Supply voltage: 230V AC, 50Hz
Current consumption: ~50mA
Power consumption: 2W
Dimensions of the flare nut: M30x1.5mm
Size: Ø40x60mm
Opening/closing period: approx. 4 minutes (25ºC)
Opening force: 120N
In non-voltage state the valve is: closed
Electric shock protection class: IP 41
Maximum enviroment temperature: 0ºC …50ºC
Storage temperature: -20ºC...+70ºC
Lenght of connecting cable: 1m
Opening/closing period: approx. 4 minutes (25ºC)
Opening force: 120N
Insulation class: double insulation
Maximum stroke: ~4mm
Country of origin: China
Product specificaties
| Merk: | Computherm |
| Categorie: | Niet gecategoriseerd |
| Model: | DF230 |
Heb je hulp nodig?
Als je hulp nodig hebt met Computherm DF230 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden