Comelit 1456G Handleiding

Comelit Niet gecategoriseerd 1456G

Lees hieronder de 📖 handleiding in het Nederlandse voor Comelit 1456G (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 201 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

TECHNICAL

MANUAL

Technical manual for the ViP interface for third-party

terminals - Art. 1456G

40-56 Vdc

+ -

SOLO CON CAVO ROSSO COMELIT 2E7T000500

ONLY WITH COMELIT RED CABLE 2E7T000500

FIXED POE VIP SYSTEM SETTABLE POE N0 POE

A2 A3 A4

N0 POE

Art 1456G

Warning

Table of contents

• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the

standards in force.

• All the equipment must only be used for the purpose it was designed for. does not assume Comelit Group S.p.A.

responsibility for improper use of the apparatus, for modifications made by third parties for any reason or purpose,

or for the use of non-original accessories and materials.

• All the products comply with the requirements of the 2014/30/EU and 2014/35/EU directives. This is proved by the

CE mark on the products themselves.

• Do not route the riser wires in proximity to power supply cables (230/400V).

• Installation, assembly and servicing operations of electrical devices must only be performed by specialised electricians.

• Disconnect the power supply before carrying out any maintenance work.

Warning 2

............................................................................................

Table of contents 2

.............................................................................

Description of Art.1456G ................................................................ 3

Power supply mode 4

.................................................................................

Art.1456G conﬁguration 5

.................................................................

1) Connection 5

...........................................................................................

A) “VILLA” / “OFFICE” TYPE SYSTEM................................................5

B) “RESIDENTIAL” TYPE SYSTEM 6

.....................................................

C) “VILLA” / “OFFICE” TYPE SYSTEM + ART. 1456/1456S FOR APP

USE 7 .....................................................................................................

D) “RESIDENTIAL” TYPE SYSTEM + ART. 1456/1456S FOR APP USE

2) Device description and addressing from ViP Manager 9

....................

2.1 INFORMATION 9 ..............................................................................

2.2 ADDRESSING 9

...............................................................................

2.2.1 PERFORM AN AUTOIP SYSTEM SCAN AND ASSIGN A VIP

ADDRESS 9

....................................................................................

2.2.2 ASSIGN A STATIC IP ADDRESS TO INTERFACE A AND B 10

2.3 DEVICE DESCRIPTION 11

...............................................................

3) Conﬁguration of Main Settings 12

.........................................................

3.1 VIP TO SIP SETTINGS 12

................................................................

3.2 VIP TO SIP EXTENSIONS 13

...........................................................

3.3 VIP TO SIP LINES 14

......................................................................

EXAMPLES OF 'THROUGH PBX' CALL MODE: 16

.............................

EXAMPLES OF 'DIRECT' CALL MODE: 18

..........................................

Video control 21

..................................................................................

SIP video standard 21

.................................................................................

RTSP streaming 21

......................................................................................

Required settings for use of streaming mode 21

.............................

Reboot with predetermined network settings 22

............................

Restore factory settings 22 ...............................................................

Recovery for ﬁrmware update (from v1.0.0 onwards) 23

................

Wiring diagrams............................................................................. 24

“Villa” / “Oce” type system 24

................................................................

“Residential” type system 25

.....................................................................

Villa” / “Oce” type system + Art. 1456/1456S for App use 26

..............

“Residential” type system + Art. 1456/1456S for App use 27

.................

Glossary* 28

........................................................................................

INTERFACE B

STATIC IP ADDRESS

192.168.1.100

INTERFACE A

IP ADDRESS: AUTOIP

Description of Art.1456G

1. Ethernet port side B (default: interface not utilised, 192.168.1.100, subnet mask 255.255.255.0)Dynamic IP address

2. Dip Switch to perform the procedure "Reboot with predetermined network settings" on page. , "Restore factory 22

settings" on page. , "Recovery for ﬁrmware update" (from version 1.0.0) on page .22 23

3. Input for power from power supply unit Art. 1441, Art. 1441B .

4. A4 non PoE Ethernet port for PC or router connection (default: )Autoip

5. A3 Ethernet port (default: )*POE Autoip

6. A2 Ethernet port for riser input (default: )POE ViP network Autoip

7. A1 Ethernet port (default: )*POE Autoip

* For use of ports A1 and A3 with the device powered via port A2, see “Power supply mode”.

With PoE port (A1, A2, A3) DO NOT use standard Ethernet cable to connect to the router or to the PC; use

only the red Comelit cable Art.2E7T000500 to connect to the router or to the PC.

Article 1456G is a ViP interface for third party terminals:

• it enables integration between the ViP door-entry phone protocol and the VoiP (SIP) standard telephone protocol

• it enables integration with third-party products

Article 1456G has 2 network interfaces ‘A’ and ‘B’, as shown in the ﬁgure.

Product specificaties

Merk:	Comelit
Categorie:	Niet gecategoriseerd
Model:	1456G
Gewicht verpakking:	96 g
Stroomvoorziening:	40 - 56 V DC
LED-indicatoren:	Ja
Montagewijze:	DIN-rail
Afmetingen verpakking (BxDxH):	86 x 96 x 76 mm
Aantal Ethernet LAN (RJ-45)-poorten:	4
Certificering:	CE\n2014/30/EU\n2014/35/EU
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Compatibele producten:	Vip Digital System
Power over Ethernet (PoE):	Ja
Afmetingen (B x D x H):	70 x 90 x 62 mm
WAN-poort:	Ethernet (RJ-45)
VoIP protocollen:	SIP
Bedrijfstemperatuur (T-T):	-5 - 50 °C
Dynamic DNS (DDNS):	Ja
Ondersteundende kabel types:	Cat5e