COLBOR PB74 Handleiding
Bekijk gratis de handleiding van COLBOR PB74 (7 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 5.0 sterren uit 16.5 reviews. Heb je een vraag over COLBOR PB74 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Power Base User Manual
PB74
Caring For Your COLBOR Product
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids, and heat sources away from the
product to prevent mechanical damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, the impact of external force.
· Do not attempt to disassemble the product. Doing so voids the
warranty.
· Please have the product checked or repaired by authorized
technicians if any malfunctions happen.
· Please remove the USB charging cable when the battery is fully
charged.
· The product might get hot during use, which is normal. Please allow a
certain space for the heat sink when using it.
· If you do not use the product for a long time, it might not be able to
turn on instantly due to the dead battery. Please charge the product
and it can resume work. Please charge the product every 3 months
regularly.
· Failure to follow all the instructions may result in mechanical damage.
· Warranty does not apply to human errors.
Product Instructions
① Power Contacts
② On/O & Battery Indicator Toggle
③ 1/4’ Screw
④ 1/4’ Screw Locking Wheel
⑤ Type-C Charging/Power Port
⑥ Remaining Battery Indicator
45W 25W
20W
45W
Operation Instructions
Please use the single-port fast charger which supports a voltage of
20V and an output power of PD45W or higher.
* According to USB-IF, only fast chargers with PD45W or higher can
provide a 20V output. Chargers with less than PD45W cannot charge
the PB74.
* PB74 is only compatible with the W60/W100 series lights.
1). Ensure PB74 is o before installation, and only turn it on after
locking it with the light.
2). Align the power contacts and 1/4' screw at the top of PB74 with
the power port and 1/4' screw hole on the light, and rotate the 1/4'
1. Charging
2. Installation and Removal
* If charging the PB74 and multiple devices via the multi-port fast
charger simultaneously, it will reduce the output power and lead to
lower charging eciency for the PB74.
* Please use the included 60W Type-C cable or a Type-C cable that
supports 60W power transmission for charging, otherwise, it will reduce
the charging eciency.
* Do not use the Type-C cable that with the power adapter to
charge the PB74 to avoid overcharging, which could lead to battery
overheating, swelling, or even catching on re.
screw locking wheel. Ensure
the lock is fastened before
turning it on.
To remove the battery,
rotate the wheel in the
opposite direction.
Product specificaties
| Merk: | COLBOR |
| Categorie: | Niet gecategoriseerd |
| Model: | PB74 |
Heb je hulp nodig?
Als je hulp nodig hebt met COLBOR PB74 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd COLBOR
29 November 2024
29 November 2024
Handleiding Niet gecategoriseerd
- ElectriQ
- Phoenix Gold
- Crouzet
- Kyoritsu
- Cinderella
- KDK
- Value
- Eventide
- Weltevree
- Stabila
- Piet Boon
- Eltra
- Philco
- Vnilrgle
- Basil
Nieuwste handleidingen voor Niet gecategoriseerd
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025