COLBOR CL220 Handleiding

COLBOR Verlichting CL220

Lees hieronder de 📖 handleiding in het Nederlandse voor COLBOR CL220 (16 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Thank you for choosing COLBOR product. Please read this manual

carefully before use and follow all instructions mentioned herein.

Video Light User Manual

CL220

Caring For Your COLBOR Product

Power Connection

You must use the power adapter that comes with the product rather than

other adapters to avoid damaging the lamp. The positive and negative

connections of the power adapter interface( DC OUT) and the lamp power

interface (DCIN) are shown below:

+ -- +

N N

Keep corrosive chemicals, liquids and heat source away from the product to

prevent mechanics damage.

The product is not waterproof.

Do not leave the product unattended while in use. Keep out of reach of

children.

Do not handle with wet hands. Do not touch the hot COB surface.

Please do not block the ventilation and do not look at the light directly when

it is on.

Do not attempt to disassemble or modify the product. Doing so voids

warranty.

Please have the product checked or repaired by authorized technicians if

any malfunctions happened.

Disconnect from the power supply when it is not in use.

Do not cover, inverted COB and radiator for high temperature, do not cover,

inverted, do not touch the lamp holder and radiator vent with your hands

when the product in use.

Do not use any power adapter of other products to avoid the lamp

malfunction.

Malfunction may be caused by dropping, impact of external force.

Failure to follow all the instructions may result in mechanics damage.

Our company reserves the right of nal interpretation of the product.

Product design and specications are subject to change without prior

notice.

Product Instructions

① LED Display Screen

② EFF Mode Button

③ EFF Rate Option Button

④ Color Temperature Option Button

⑤ Setting Button

⑥ Color Temperature Control Knob

⑦ Brightness Control Knob

⑧ DC 48V Power Port

⑨ Power Button

⑩ Bowens Mount

⑪ COB Lamp Beads

⑫ Lamp Angle Adjustment Locking Grip

⑬ Bracket

⑭ Air Outlet

⑮ NATO Slideway

⑯ Air Inlet

⑰ Lamp Grip

⑱ Soft Light Cover Hole

⑲ Soft Light Cover Hole Screws

⑳ Bracket Screw

Light Installation

Hold the COB cover with the Bowens Mount

tenon and rotate it as the direction of the arrow.

Note: Be sure to remove COB protective cover

and COB protective lm before use.

Installation of reector: Align the reector with the groove around the lamp

head and clip it in, turn the reector as the direction of the arrow, and the

reector installation will be completed after the top rod rebounds.

Removal of reector: Under the instructions of “Lamp Cap Protection Cover

Removal".

1. Removal of lamp cap protection cover

2. Installation and removal of reector

Product specificaties

Merk:	COLBOR
Categorie:	Verlichting
Model:	CL220

Heb je hulp nodig?

Als je hulp nodig hebt met COLBOR CL220 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting COLBOR

COLBOR CL220M Handleiding

11 Maart 2024

COLBOR CL220R Handleiding

11 Maart 2024

COLBOR CL330 Handleiding

11 Maart 2024

COLBOR CL220 Handleiding

11 Maart 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Aveo Engineering Powerburst Daylite Handleiding

27 April 2024

Aveo Engineering Redbaron XP Galactica Handleiding

27 April 2024

Aveo Engineering Maxx Atlas Handleiding

27 April 2024

Aveo Engineering Ultra Embedded Handleiding

27 April 2024

GVM -PRO-SD300C Handleiding

25 April 2024

GVM -PD60B Handleiding

25 April 2024

Lucide Brackx-LED Handleiding

23 April 2024

Lucide Dica LED Handleiding

23 April 2024

Lucide Yazoo Led Handleiding

23 April 2024

Lucide Dyvor-LED Handleiding

23 April 2024