Cocraft PRO Edition MC300-T Handleiding

Cocraft Multitool PRO Edition MC300-T

Lees hieronder de 📖 handleiding in het Nederlandse voor Cocraft PRO Edition MC300-T (52 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
LĂ€s hela bruksanvisningen noggrant och
försÀkra dig om att du har förstÄtt den
innan du anvÀnder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nĂžye og forsikre
deg om at du forstÄr dem, fÞr du tar
produktet i bruk. Ta vare pÄ anvisningene
for seinere bruk.
TÀrkeÀÀ tietoa:
Lue nÀmÀ ohjeet huolellisesti ja varmista
ettÀ olet ymmÀrtÀnyt ne, ennen kuin
alat kÀyttÀÀ laitetta. SÀilytÀ ohjeet
myöhempÀÀ tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfÀltig
durchlesen und aufbewahren.
P R O E D I T I O N
Ver. 20170131
Original instructions
Bruksanvisning i original
Originalbruksanvisning
AlkuperÀinen kÀyttöohje
Original Bedienungsanleitung
Art.no Model
40-9926 PMF300S.1
PRO MC300-T
MULTI-TOOL 300 W
40-9926
MULTIVERKTYG MULTIVERKTØY
MONITOIMITYÖKALU MULTIWERKZEUG
ENGLISH
3
Multi-Tool
Art.no 40-9926 Model PMF300S.1
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services (see address details on theback).
Safety
General safety instructions for powertools
Warning! Readall theinstructions. Failure to adhere to thefollowing instructions may
lead to electric shocks, ïŹres and/or serious injury. Theterm “power tools” in thewarning
text below refers to your handheld mains operated or battery operatedtool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Cluttered and poorly lit areas Keep thework area clean and well illuminated.
invite accidents.
b) Do not use power tools in explosive environments,e.g. near to ïŹ‚ammable liquids,
gases ordust. Powertools generate sparks that can easily ignite dust orfumes.
c) Keep children and other bystanders away from thearea where you are using
thepowertool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) Thepower tool’s plug must ïŹt correctly into thewall socket. Nevermodify
theplug in anyway. Neveruse anadaptor together with earthed powertools.
UnmodiïŹed plugs and suitable wall sockets minimize therisk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators. Thereis anincreased risk of receiving anelectrical shock if your
body is earthed.
c) Ifwater gets Do not expose thepower tool to rain or other wet conditions.
inside it increases therisk of electricshock.
d) Do not abuse themainslead. Neveruse thelead to carry thetool or pull
theplug from awall socket. Keepthelead away from heat, oil, sharp edges
and movingparts. Damaged or tangled leads increase therisk of electricshock.
e) When using power tools outdoors, use anextension lead that is suitable for
this purpose. Theuse of anextension lead designed for outdoor use decreases
therisk of electric shocks.
f) If theuse of thepower tool in awet environment is unavoidable, awall
socket equipped with aresidual current device (RCD) should beused.
Using anRCD signiïŹcantly reduces thechances of you receiving anelectricshock.


Product specificaties

Merk: Cocraft
Categorie: Multitool
Model: PRO Edition MC300-T

Heb je hulp nodig?

Als je hulp nodig hebt met Cocraft PRO Edition MC300-T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Multitool Cocraft

Handleiding Multitool

Nieuwste handleidingen voor Multitool