Clarion CCUXM1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Clarion CCUXM1 (18 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
XM Passport Interface Adapter Interface Cable
Cable adaptador para la interface de XM Passport
Câble adaptateur pour l’interface XM Passport
CCUXM1
Installation Guide
Guía de instalación
Guide d’installation
2
English
Step 1:
Remove the head unit from your dashboard.
Important: Depending on how your head unit was installed you may have to remove part or
all of your dash board before the head unit can be pulled out. You may also have to remove
screws to complete this step.
Note: Before proceeding, make sure that the PIA has been programmed. Refer to the
PIA Installation Manual. Professional installation is recommended.
Step 2:
Connect the 34-pin cable connector to the Programmable Interface Adapter (PIA) mating
connector as shown in Fig. 1. Slide the rubber strain relief onto the PIA case. Attach the Car
Dock USB connector into the USB receptacle on the PIA. Make sure the connectors are
secure, and slide the top cover onto the bottom housing. (Refer to Fig. 2.)
Insatallation
Antenna
Note: Make sure all cables
are securely connected
Mating
Connector
Connector
Mini-Tuner and
Car Dock
Ground Wire
Yellow Wire,  atter
Yellow and
black wire are
optional, based
on model.
Fuse
Fig. 1 PIA Cable Interface
3
English
Step 3:
Connect the end of the cable with the DIN connector and audio cables to the back of
the head unit as shown in Fig. 2. The shorter end of the cable, coming from the PIA, is a
pass-through cable that can be used to connect other products to your head unit, i.e., CD
changer.
Note: The location of the connections on the head unit may vary depending on the model.
Step 4:
Start your car and turn on your head unit to confirm that the XM Direct system is properly
connected. Please refer to your stereo owners manual on how to access XM mode. When
you tune to XM channel 1, you should see “XM Preview” on your head unit LCD, and hear
that channel through your car speakers. If not, check to make sure all connections are
correct or refer to the troubleshooting section of this installation guide.
Step 5:
Mount and secure the interface cable in a suitable location that will not interfere with the
radio and will not vibrate or rattle after installation.
Insatallation
Left / Right
Audio CablesDIN Connector
XM Radio
Tuner
Fig. 2 Head Unit (Rear View) Connections


Product specificaties

Merk: Clarion
Categorie: Hifi systeem
Model: CCUXM1

Heb je hulp nodig?

Als je hulp nodig hebt met Clarion CCUXM1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Clarion

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem