Cisco WAP371 Handleiding

Cisco Router WAP371

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco WAP371 (14 pagina's) in de categorie Router. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Quick Start Guide
390634
Cisco WAP371 Wireless Access Point
1 Cisco WAP371 Wireless Access Point
Welcome
Thank you for choosing the Cisco WAP371 Wireless Access Point. The
Cisco WAP371 is an indoor dual radio 802.11ac + 802.11n access point.
This guide is designed to familiarize you with the general layout of the
access point, describe how to deploy the device in your network, and
describe how to configure the device. Your access point has more features
and functionality than what is described in this guide. For additional
information, see the Administration Guide. A link to the Administration
Guide is found in Where to Go From Here, page 11.
Package Contents
• Wireless Access Point
• Mounting kit
• This Quick Start Guide
• Ethernet cable
• Pointer Card with China RoHS
• Technical Support Contacts
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with browser support for:
– Internet Explorer v7.0 or later
– Chrome v5.0 or later
– Firefox v3.0 or later
– Safari v3.0 or later
• Tools for installing the hardware
• One or more Ethernet network switches with PoE
1
Cisco WAP371 Wireless Access Point 2
Cisco WAP371 Wireless-AC/N Dual Radio
Access Point with Single Point Setup
Features
Front Panel
The front panel of the device consists of three lights: Power, WLAN, and
LAN. For full descriptions of the colors of the lights and their indications,
see Verifying the Hardware Installation, page 6.
A Kensington lock slot is found under the lights.
Back Panel
The back panel of the device has an RJ-45 Ethernet port. Use the Ethernet
port to power your device using PoE. It is an auto-sensing, Gigabit
Ethernet (802.3) port used to connect your WAP devices to network
devices, such as computers, routers, or switches. We strongly
recommend that you use a Category 5e or better cable for gigabit
connectivity.
The 12V DC jack is used to connect the supplied power adapter to the
Cisco WAP371 if you are not using PoE.
The back panel of the device has a Reset button. See Rebooting the
Devices or Returning them to their Factory Default Settings, page 10
for information on the Reset button.
Default SettingHAF1H39Cs
If you are using a Cisco RV Series router, the default range for the DHCP
assigned address is from 192.168.1.100 to 192.168.1.254. Any device
connecting to the same LAN will be assigned an IP address in this range.
Parameter Default Value
Username cisco
Password cisco
LAN IP Address DHCP address assigned
by server
Fallback LAN IP 192.168.1.245
Subnetwork Mask 255.255.255.0
2


Product specificaties

Merk: Cisco
Categorie: Router
Model: WAP371
Kleur van het product: Wit
Gewicht: 740 g
Breedte: 230 mm
Diepte: 230 mm
Hoogte: 43 mm
LED-indicatoren: LAN,Power,WLAN
Inclusief besturingssysteem: Linux
Frequentieband: 2.4 - 5 GHz
Aantal Ethernet LAN (RJ-45)-poorten: 1
Bevestigingsmogelijkheid voor kabelslot: Ja
Kabelslot sleuf type: Kensington
Aansluiting voor netstroomadapter: Ja
Intern geheugen: 256 MB
Modulatie: OFDM
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Netwerkstandaard: IEEE 802.11ac,IEEE 802.11b,IEEE 802.11e,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1D,IEEE 802.1Q,IEEE 802.1x,IEEE 802.3af
Ondersteunde beveiligingsalgoritmen: HTTPS,SSID,WPA,WPA2
Antenne versterkingsniveau (max): 2 dBi
Aantal gebruikers: 64 gebruiker(s)
Temperatuur bij opslag: -20 - 70 °C
Intern: Nee
Upgraden van firmware mogelijk: Ja
Web-gebaseerd management: Ja
Luchtvochtigheid bij opslag: 5 - 90 procent
Reset button: Ja
Flash memory: 128 MB
2,4 GHz: Ja
5 GHz: Ja
Kanaalbandbreedte: 80 MHz
Quality of Service (QoS): Ja
VLAN=ondersteuning: Ja
DHCP client: Ja
Power over Ethernet (PoE): Ja
Antennefuncties: Ingebouwde antenne
Aantal kanalen: 21 kanalen
WAN-poort: Ethernet (RJ-45)
Beheerprotocollen: SNMP
Stroomverbruik (typisch): 17 W
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Type antennerichting: Omni-directioneel

Heb je hulp nodig?

Als je hulp nodig hebt met Cisco WAP371 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Cisco

Handleiding Router

Nieuwste handleidingen voor Router