Cisco WAP200 Handleiding

Cisco Router WAP200

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco WAP200 (74 pagina's) in de categorie Router. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/74

USER GUIDE

BUSINESS SERIES

Wireless-G Access Point

Model No. WAP200

with Power Over Ethernet

and Rangebooster

Wireless-G Access Point with Power Over Ethernet and Rangebooster

Specifications are subject to change without notice. Linksys, Cisco and the Cisco Logo are registered trademarks

How to Use this User Guide

The user guide to the Dual-Band Wireless Access Point has been designed to make understanding networking

with the Access Point easier than ever. Look for the following items when reading this User Guide:

In addition to these symbols, there are

definitions for technical terms that are presented like this:

Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like

this:

Figure numbers and descriptions can also be found in the “List of Figures” section.

This exclamation point means there is a caution or

warning and is something that could damage your

property or the Access Point.

word: definition.

This checkmark means there is a note of interest and

is something you should pay special attention to while

using the Access Point.

This question mark provides you with a reminder about

something you might need to do while using the Access Point.

Figure 0-1: Sample Figure Description

WAP200-UG-8062710B-RC

WARNING: This product contains chemicals, including lead, known

to the State of California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

Wireless-G Access Point with Power Over Ethernet and Rangebooster

Table of Contents

Chapter 1: Introduction 1

Welcome 1

What’s in this User Guide? 2

Chapter 2: Planning Your Wireless Network 4

Network Topology 4

Roaming 4

Network Layout 5

Example of a simple wireless network 6

Chapter 3: Getting to Know the Wireless-G Access Point 7

The LEDs 7

The Ports 8

Antennas and Positions 9

Chapter 4: Connecting the Wireless-G Access Point 10

Overview 10

Connection 10

Placement Options 11

Chapter 5: Setting Up the Wireless-G Access Point 12

Overview 12

Accessing the Utility 12

Navigating the Utility 13

Chapter 6: Configuring the Wireless-G Access Point 16

The Setup - Basic Setup Tab 16

The Setup - Time Tab 17

The Wireless - Basic Wireless Settings Tab 18

The Wireless - Wireless Security Tab 19

The Wireless - Wireless Connection Control Tab 24

The Wireless - Advanced Wireless Settings Tab 25

The Wireless - VLAN & QoS Tab 26

The AP Mode Tab 28

The Security Monitor - Basic Settings Tab 31

The Security Monitor - Event Log Tab 32

The Administration - Management Tab 34

Product specificaties

Merk:	Cisco
Categorie:	Router
Model:	WAP200
Kleur van het product:	Grijs
Gewicht:	400 g
LED-indicatoren:	Ja
Wi-Fi-standaarden:	802.11g,802.11b
Generatie mobiel internet:	4G
Ethernet LAN:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Wifi-band:	Nee
Wifi-standaard:	802.11g
Netwerkstandaard:	IEEE 802.3af,IEEE 802.11b,IEEE 802.11g
Ondersteunde beveiligingsalgoritmen:	WEP,WPA,WPA2
3G:	Nee
4G:	Nee
Temperatuur bij opslag:	20 - 70 °C
Mobiele netwerkverbinding:	Nee
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	5 - 90 procent
Reset button:	Ja
Rack-montage:	Nee
xDSL-verbinding:	Nee
MAC adres filtering:	Ja
Filtratie:	Ja
Ethernet WAN:	Ja
Quality of Service (QoS):	Ja
DHCP client:	Ja
Afmetingen (B x D x H):	170 x 195 x 205 mm
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
ISDN-aansluiting:	Nee