Cisco SPA112 Handleiding

Cisco Niet gecategoriseerd SPA112

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco SPA112 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

Quick Start Guide

Cisco SPA100 Series Analog Telephone

Adapters

SPA112 Two Port Phone Adapter

SPA122 ATA with Router

Package Contents

•Analog Telephone Adapter

•Ethernet Cable

•Power Adapter

•Quick Start Guide

•Product CD-ROM

2 Cisco SPA100 Series Analog Telephone Adapters

Welcome

Thank you for choosing a Cisco SPA100 Series Analog Telephone Adapter.

This product family includes the following models:

• SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN

port.

• SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN port, 1 10/100

LAN port, and built-in router.

This guide describes how to physically install the equipment and how to

get started with the configuration.

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

•An active Internet account and Voice over IP account

•Ethernet cable to connect to your broadband network device

•Phone to connect to your SPA112/122

•Phone cable to connect your phone

•Optional: Uninterruptible Power Supply (UPS) to provide backup power

Product Features

Top Panel

Cisco SPA100 Series Analog Telephone Adapters 3

Back Panel

Feature Description

Phone 1

Phone 2

Steady green—On hook.

Slow flashing green—Off hook.

Off—Port not ready.

Internet

Flashing green—Transmitting or receiving data through

the WAN port.

Off—No link.

System

Steady green—System ready, IP address acquired.

Slow flashing green—Acquiring IP address. (By default,

uses DHCP.)

Fast flashing green—Upgrading firmware.

Off—No power or system can not boot up.

Feature Description

Reset Using a paperclip or similar object, press this button

briefly to restart the unit. Press and hold for 10

seconds to restore the factory default settings.

Phone 1,

Phone 2 (Gray)

Connect to an analog phone, using an RJ-11 phone

cable.

Ethernet (Yellow)

SPA122 Only

Can be used to connect to a device on your network,

such as a computer, using an Ethernet cable.

Internet (Blue) Connect to a broadband network device (DSL or

cable modem) or a network router, using an Ethernet

cable.

Power Connect to a power source, using the provided

power adapter.

Product specificaties

Merk:	Cisco
Categorie:	Niet gecategoriseerd
Model:	SPA112
Gewicht:	153 g
Breedte:	101 mm
Diepte:	101 mm
Hoogte:	28 mm
LED-indicatoren:	Ja
Stemcodecs:	G.711, G.726, G.729
Wachtstand:	Ja
Nummerherkenning:	Ja
Conferentiegesprek mogelijk:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	FCC, CE, ICES, A-Tick, RoHS, UL
Ondersteunde beveiligingsalgoritmen:	SSL/TLS
Temperatuur bij opslag:	-25 - 70 °C
Power LED:	Ja
Ondersteunde netwerkprotocollen:	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
Luchtvochtigheid bij opslag:	10 - 90 procent
Reset button:	Ja
MAC adres filtering:	Ja
Output current:	2 A
Spanning:	5 V
Quality of Service (QoS):	Ja
DHCP client:	Ja
Modem (RJ-11) poort:	2
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
VPN eigenschappen:	802.1p
Autenticatiemethode:	SIP
Compatible met fax:	T.38