Cisco Headset 561 Handleiding
Cisco
Niet gecategoriseerd
Headset 561
Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco Headset 561 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2.5 gebruikers gemiddeld met 4.6 sterren beoordeeld
Pagina 1/11
January 20, 2023 | 17004 view(s) | 155 people thought this was helpful
Get Started with the Cisco Headset 500 Series
The Cisco Headset 500 Series is a line of wired and wireless headsets optimized
for Cisco IP Phones, Jabber, and Cisco Webex.
The Cisco Headset 500 Series is a series of headsets offering a range of optimized integrations with Cisco IP
Phones, Webex, Webex Devices, and other calling solutions.
The Cisco Headset 520 and 530 Series are a set of wired headsets with an integrated in-line USB controller.
The 530 Series is also available with an RJ-9 connector for integration with Cisco IP Phones.
Product:
Headsets
For:
User
Devices:
Accessories
Subscribe
The Cisco Headset 560 Series is a pair of wireless headsets that utilize DECT technology for a secure wireless
connection.
520 Series
Cisco Headset 521 and 522 are wired headsets that have been developed for use on Cisco IP phones and
devices. The Cisco Headset 521 features a single earpiece for extended wear and comfort while the Cisco
Headset 522 features two earpieces for use in a noisy workplace.
Both headsets feature a 3.5 mm connector for use on personal computers and mobile devices. With the 3.5
mm connector, the headset works like other headsets that plug into audio jacks.
The headsets also come with an inline USB controller that provides easy access to call control capabilities,
including answer, end call, reject call, hold and resume, mute, and volume control. The inline controller is
also available with a USB-C connector.
If you have headset firmware release 2.3(1) or later, you can maintain call control through your Cisco
Headset 520 Series when you switch between soft clients. For example, you can mute a call on the Webex
app (version 41.8 or later) and answer an incoming Cisco Jabber call (version 14.1 or later) through the
Jabber UI. Once the Jabber call is complete, you can resume your Webex call and retain call control
through your headset.
For more information on multi-app control, see .Cisco Headset Multi-app Feature
See the for complete information on compatibility with other CiscoCisco Headset Compatibility Guide
devices and call clients.
Your controller buttons are used for basic call features.
Figure 1: Cisco Headset 520 Series Controller
Table 1. Cisco Headset 520 Series Controller Buttons
Number Name Description
1 Mute button Toggle the microphone on and off.
2
Volume
button
Adjust the volume on your headset.
Number Name Description
3 Call
Manage calls:
Press once to place a call (Cisco IP phone only)
Press once to answer an incoming call.
Press and hold to end a call.
Press twice to reject an incoming call.
Press once to put an active call on hold. Press again to retrieve a call from
hold.
530 Series
The Cisco Headset 531 and 532 are two wired headsets developed for use on Cisco IP phones and other
call devices. The Cisco Headset 531 features a single earpiece for extended wear and comfort. The Cisco
Headset 532 features two earpieces for use in a noisy workplace.
Both headsets feature an RJ9 connector for use on most Cisco IP phones. With the RJ9 connector, you get
simple, high-quality, two-way audio.
Features such as call control, in-headset ringtones, and audio settings are unavailable through the
RJ9 port.
An inline USB adapter is also available with a built-in controller that provides easy access to call control
capabilities, including answer, end call, reject call, hold and resume, mute, and volume control. You can use
the quick disconnect on the USB controller cable to move your headset from one device to another.
The inline controller is also available with a USB-C connector.
You can connect a second headset to the Cisco Headset 530 Series with the Cisco Headset 530 Series Y-
trainer Cable. See Connect and Use the Cisco Headset 530 Series Y Trainer Cable for more information.
If you have headset firmware release 2.3(1) or later, you can maintain call control through your Cisco
Headset 530 Series when you switch between soft clients. For example, you can mute a call on the Webex
app (version 41.8 or later) and answer an incoming Cisco Jabber call (version 14.1 or later) through the
Jabber UI. Once the Jabber call is complete, you can resume your Webex call and retain call control
through your headset.
For more information on multi-app control, see .Cisco Headset Multi-app Feature
See the for complete information on compatibility with other CiscoCisco Headset Compatibility Guide
devices and call clients.
Your adapter is used for basic call features.
Product specificaties
| Merk: | Cisco |
| Categorie: | Niet gecategoriseerd |
| Model: | Headset 561 |
Heb je hulp nodig?
Als je hulp nodig hebt met Cisco Headset 561 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Cisco
4 Juni 2025
29 Maart 2025
5 Augustus 2024
29 Mei 2023
7 Mei 2023
4 Mei 2023
1 Mei 2023
27 April 2023
27 April 2023
20 April 2023
Handleiding Niet gecategoriseerd
- Niet gecategoriseerd Maytag
- Niet gecategoriseerd Solac
- Niet gecategoriseerd Childhome
- Niet gecategoriseerd Aeotec
- Niet gecategoriseerd Fysic
- Niet gecategoriseerd Celly
- Niet gecategoriseerd Hoffman
- Niet gecategoriseerd Bluetti
- Niet gecategoriseerd Nuna
- Niet gecategoriseerd UTEPO
- Niet gecategoriseerd Winia
- Niet gecategoriseerd Reltech
- Niet gecategoriseerd Topcraft
- Niet gecategoriseerd SXT
- Niet gecategoriseerd Anex
Nieuwste handleidingen voor Niet gecategoriseerd
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025