Choice 407ROTSLICE Handleiding
Choice
Snijmachine
407ROTSLICE
Lees hieronder de 📖 handleiding in het Nederlandse voor Choice 407ROTSLICE (4 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.4 sterren beoordeeld
Pagina 1/4
User Manual
Item #407ROTOSLICE
Adjustable from
1
/
8
” to ½” Slices
07/2021
Rotary Produce Slicer
Safety Instrucons
Be careful when handling and operang the machine, as the blades are very sharp. Always
keep your hands away from the blades.
Mounng
1) Place the mounng base on the desired work surface and draw an outline of the
mounng base.
2) Draw circles where the four holes of the mounng base are located then remove the
mounng base from the surface.
3) Drill ¼” (or slightly larger) holes in the work surface where the circles from the holes in
the mounng base were drawn.
4) Secure the mounng base to the work surface using the screws provided.
5) Aach the rotary slicer to the mounng base by sliding the base of the slider into the
mounng base. Twist the lock screw unl the rotary slicer is rmly aached.
Adjust Slice Thickness
1) To remove the slicing assembly, turn the sha lock to the le, and then pull the slicing
assembly out of the frame using the handle.
2) Hold the slicing assembly staonary and twist the adjusng screw located at the
opposite end of the slicing assembly (opposite the handle). Connue to twist unl
desired thickness is reached.
Please read and comply with the instrucons listed on this document. To get the best service
life and performance from your machine, clean it thoroughly before and aer each use by
following the instrucons listed below. Minimize the use of alkaline cleaners as they may dull
the nish and cause ping.
User Manual
Rotary Produce Slicer
Adjusting Screw
Operaon
1) Check that slice thickness is set to the desired level.
2) Core, slice or cut any produce to prepare it for slicing. Make sure that the produce will t
in the trough.
3) Li the cover plate and place produce in the trough in front of the push plate. Close the
cover plate.
4) Gently push the produce towards the slicing assembly using the push plate handle, while
simultaneously rotang the slicing assembly handle.
5) For slice uniformity, rotate the slicing handle slower as slice thickness increases. This
will ensure that produce is fully advanced to the slicing plate before slicing with the next
blade begins.
6) For ease of use, begin rotang the slicing assembly before advancing the produce
through the trough. This will provide a running start which will make producing the rst
slice easier.
Cleaning and Maintenance
1) Turn the sha lock assembly to the le and pull the slicing assembly away from the frame
to remove it.
2) Remove the lock pin and the sha lock assembly. Set in a secure locaon where they will
not get lost.
3) Li the guard o of the frame.
4) Twist the push plate handle counter-clockwise to remove it from the push plate. Remove
the push plate from the trough.
5) Remove the unit from the mount.
6) Thoroughly clean all components with water and soap, or a mild detergent.
7) Immediately aer cleaning, dry all components and re-assemble by reversing the
disassembly process described above.
8. If necessary, lubricate the grooves in the trough and push plate arms with mineral oil or
its equivalent (do not use cooking oil).
Changing Blades
1) Remove the slicing assembly from the rest of the unit by turning the sha lock assembly
to the le and pulling the slicing assembly away from the frame.
2) Remove screws to release blades. Replace with new blades and secure using the screws.
User Manual
Cont.
Product specificaties
| Merk: | Choice |
| Categorie: | Snijmachine |
| Model: | 407ROTSLICE |
Heb je hulp nodig?
Als je hulp nodig hebt met Choice 407ROTSLICE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Choice
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
Handleiding Snijmachine
- Snijmachine Bifinet
- Snijmachine Oster
- Snijmachine Gourmetmaxx
- Snijmachine Cuisinart
- Snijmachine Jata
- Snijmachine Sammic
- Snijmachine Cecotec
- Snijmachine Ariete
- Snijmachine Avantco
- Snijmachine Kogan
- Snijmachine Coline
- Snijmachine Graef
- Snijmachine H.Koenig
- Snijmachine Vollrath
- Snijmachine Hendi
Nieuwste handleidingen voor Snijmachine
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025