Chief SLM8630 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chief SLM8630 (1 pagina's) in de categorie Projector accessoire. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
SLB-8630 H
ANGER
B
RACKET
FOR
3M MP8630
Unpack carton and check contents:
(1) SLB-8630 Plate (2) U-Form Rod
(4) 10-24 Lock Nuts (4) #10 Flatwashers
(8) Felt Squares (6) Thumb Nuts
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the SLB-8630 Plate onto the projector bottom.
3. Attach the U-Form rods around the projector and up through the two holes in the
SLB-8630 plate using the #10 flatwashers and 10-24 nylock nuts. NOTE: The
U-Form rods MUST be attached for mount to properly support projector.
This is a correct fit. DO NOT OVERTIGHTEN U-Form rod to projector.
Only tighted until a secure fit is achieved. Felt squares are provided to
protect projector shell, if desired. They can be attached to the projector or
wrapped around the U-Form rod.
4. See RPA and/or Smart-Liftâ„¢ Instructions.
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com


Product specificaties

Merk: Chief
Categorie: Projector accessoire
Model: SLM8630

Heb je hulp nodig?

Als je hulp nodig hebt met Chief SLM8630 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projector accessoire Chief

Handleiding Projector accessoire

Nieuwste handleidingen voor Projector accessoire