Chief SLM710 Handleiding
Pagina's 1 Engels Projector accessoire
Bekijk de handleiding van Chief SLM710 gratis online of download de PDF. Deze handleiding is 65 keer bekeken. Vraag over dit model? Stel een vraag
8850-000199 08/02/07
SLB-710 HANGING BRACKET
FOR TOSHIBA TLP 710 / 711 U
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-710 Hanging Bracket(2) M4-7 x 12mm Machine Screws
(6) 10-24 Thumb Nuts(2) M4 Flat Washers
(1) U-form wire bracket(2) 10-24 Nylock Nuts
(4) Felt Squares(2) # 10 Flatwasher
INSTALLATION INSTRUCTIONS
1.Lay projector upside down on work surface, align holes in longer tabs with two threaded
inserts that are offset near adjust feet on each side.
2.Insert two machine screws (M4-7 x 12mm and tighten moderately.
3.Place U-form wire bracket up around rear of projector and through holes in tabs of hanging
bracket. Thread two nuts (10-24) onto u-form on each side and tighten moderately.
4.Review RPA instructions for final mounting.
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
Product specificaties
| Merk: | Chief |
| Categorie: | Projector accessoire |
| Model: | SLM710 |
Heb je hulp nodig?
Als je hulp nodig hebt met Chief SLM710 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden