Chief SLM553 Handleiding

Bekijk gratis de handleiding van Chief SLM553 (1 pagina’s), behorend tot de categorie Projector accessoire. Deze gids werd als nuttig beoordeeld door 46 mensen. Heb je een vraag over Chief SLM553 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

8850-000179 08/02/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

INSTALLATION INSTRUCTIONS

SLB-553 HANGER RACKETB

for Epson 53C, 73C,

Prior to assembly, unpack carton and verify contents.

For security installation, use security hardware package inside the ALL-POINTS™

Security Kit. Follow the instructions below for attaching the bracket to the projector

using either standard hardware or security hardware.

If you are missing any of the following components, please contact Customer Service at

1-800-582-6480

(1) SLB-553 Bracket(3)M4 -20mm Philips Pan Screws

(4)10 - 24 Thumb Nuts(1)M4 -20mm Philips counter sink Screws

(3)M4 Flatwasher(4)1/2" X #10 X 3/8" Nylon Spacer

INSTALLATION INSTRUCTIONS

1.Turn projector upside down.

2.Place the four 3/8” nylon spacers over the four threaded inserts in the bottom of the

projector.

3.Place the SLB-553 bracket onto the four 3/8” nylon spacers on the bottom of the

projector lining up the four mounting holes in the bracket with the four nylon spacers.

4.Using the four M4 x 20mm screws start them into the four threaded inserts using the

countersink screw in the counter sink hole and tighten all fasteners at this time, securing

the bracket to the projector.CAUTION: When attaching the mount be careful not to

overtighten screws.

5.See RPA and/or Smart-Lift™ Instructions.

Product specificaties