Chief PST2000B Handleiding

Chief Flat panel steun PST2000B

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PST2000B (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Chief Manufacturing, a division of Milestone AV Technologies 8804-000255 Rev F

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918 10/08

I N S T A LL A T IO N IN S T R U C T IO N S

LARGE FLAT PANEL DISPLAY STATIC MOUNT

PST 2000 Series

The PST static wall mount accommodates large flat

screens weighing up to 200 lbs (90.72kg). The teardrop

holes in the mount allow for quick connect/disconnect of

the screen, thus simplifying installation and maintenance

processes.

The top and bottom mounting brackets are adaptable to

supporting framework with wood studs that are 16” on

center or 24”on center.

The mount has integrated lateral shift, allowing for four

different mounting options. For dual wood studs 16” on

center, the lateral shift is + 4.5 inches. For dual wood

studs 24” on center, the lateral shift is + 0.5 inches.

After installing the flat screen on the mount, the screen

can be locked in place using the convenient locking ﬂag.

A padlock can be used on the latching ﬂag for added

security.

The mount is concealed behind the display, making it a

low profile wall mount.

! IMPORTANT: If the installation of this product

requires OSHPD seismic approval, refer to OSHPD

pre-approval documents and drawings before beginning

installation. OSHPD documents and drawings are

available at www.chiefmfg.com, and located on the

product information page for the mount. PST 2000 Series

BEFORE YOU BEGIN

CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly

study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-

tion to the “Important Warnings and Cautions” on Page 2.

The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the

mount must be capable of supporting five times the total weight of the equipment.

The maximum weight to be installed on the PST mount is 200 lbs (90.72kg).

Installation Instructions PST 2000 Series

IMPORTANT WARNINGS and CAUTIONS!

WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the

instructions.

CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING Improper installation can result in serious personal injury! Make sure that the mounting surface

can support a redundant weight factor five times the total weight of the equipment: if not, reinforce

the structure before installing the mount.

WARNING Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.

WARNING The installer is responsible for verifying that the wall to which the mount is anchored will safely

support the combined load of all attached components or other equipment.

WARNING The weight of the large flat screens must not exceed 200 lbs (90.72kg), the maximum load capacity

of the mount.

WARNING Watch for pinch points. Do not put your fingers between movable parts.

WARNING Make sure the flag securing the display is fully raised at all times except when removing or

installing the display. The flag must be fully raised when installing/removing cables.

CAUTION Inspect the unit for shipping damage before you begin the installation.

DIMENSIONAL DRAWING

Installation Instructions PST 2000 Series

CONTENTS

DIMENSIONAL DRAWING ..................................... 2

TOOLS REQUIRED FOR INSTALLATION.............. 3

PARTS LIST .............................................................. 3

PST INSTALLATION................................................ 4

Select Mounting Location........................................ 4

Flag Extender Installation (OPTIONAL).................. 4

Mount the PST ........................................................ 5

ATTACH PSB TO THE DISPLAY............................. 6

INSTALL THE DISPLAY.......................................... 6

REMOVE THE DISPLAY.......................................... 6

TOOLS REQUIRED FOR

INSTALLATION

Drill and drill bit set

Socket wrench set

#2 Phillips Screwdriver

NOTE: Other tools may be required depending on your

method of installation.

Figure 1. Parts

PARTS LIST

Prior to assembly, unpack the carton completely. Verify

contents listed in Table 1 and Figure 1.

Read installation instructions completely. If you are

missing any of the listed parts, contact Customer Service

at: 1-800/582-6480.

Table 1. Parts List

REF DESCRIPTION QTY

10 Plasma Static Mount 1

20 Flag Extender 2

30 Phillips Machine Screw, 10-24 x ½” 2

40 Thin Nylock Nut, 10-24 2

50 Lag Bolts, 5/16” x 2-½” 4

60 Flat Washer, 5/16” 4

4 Lag Bolts

4 Washers

10 40

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	PST2000B
Kleur van het product:	Zwart
Breedte:	660 mm
Diepte:	31 mm
Hoogte:	467 mm
Materiaal behuizing:	Metaal
Montagewijze:	Muur
Geschikt voor schermmaten:	42 - 71 "
Maximale gewichtscapaciteit:	90.7 kg
Certificering:	TUV, UL
Maximale schermgrootte:	71 "
Minimale schermgrootte:	42 "