Chief PAC720 Handleiding

Chief Niet gecategoriseerd PAC720

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PAC720 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

Cart and Stand Clamp Head Accessory

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

PAC720

Installation Instructions PAC720

TOOLS REQUIRED FOR INSTALLATION AND PARTS

3/16"

(Provided)

I/M

B (1)

C (1)

A (1)

E (2)

D (4)

(5/16-18 x 3/4")

F (1)

3/16"

(3/8-16)

PAC720 Installation Instructions

ASSEMBLY AND INSTALLATION

WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY

MAY LEAD TO SERIOUS PERSONAL INJURY OR

DAMAGE TO EQUIPMENT! It is the installer’s responsibility

to ensure the total amount of weight placed on the cart/stand

does not exceed 200 lbs (90.72 kg) for the PFC, 200 lbs

(90.72 kg) for the PF1, 400 lbs (181.44 kg) for the PF2

[200 lbs (90.72 kg) per faceplate].

Installing Display(s) to Cart/Stand

1. Install display(s) to cart or stand following the installation

instructions included with the cart/stand.

Assembling Faceplate to Bracket

1. Attach faceplate (A) to bracket (B) using two 3/8-16 Nylock

lock nuts (E). (See Figure 1)

Figure 1

2. Secure faceplate with bracket around post to clamp bracket

NOTE: The faceplate assembly must be attached to the clamp

bracket below the knob on the lower part of the cart/

stand post.

Figure 2

Assembly for Dual Display

WARNING: TIPPING HAZARD! Place PAC720 only on

FRONT of PFC and PF1. PAC720 may be placed on both

FRONT and BACK of PF2.

1. Attach first faceplate (A) to bracket (B) using two 3/8-16

Nylock lock nuts (E). (See Figure 1)

2. Attach second faceplate (A) to bracket (B) using two 3/8-16

Nylock lock nuts (E). (See Figure 3)

Figure 3

3. Secure faceplate assemblies with bracket to clamp brackets

buttonhead cap screws (D) on EACH assembly. (See

Figure 4)

(A)

(B)

(E) x 2

(C)

(D) x 4

(PFC shown)

PAC720 must be

installed BELOW

the knob located

on the post back.

(A)

(B)

(E) x 2

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	PAC720
Kleur van het product:	Zwart
Montagewijze:	Vloer
Maximale gewichtscapaciteit:	90.7 kg
Code geharmoniseerd systeem (HS):	85299097