Chief NS1S1223 Handleiding

Chief Niet gecategoriseerd NS1S1223

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief NS1S1223 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8821-002017 Rev01

a Duchossois Group Company

01/11

NS1S12/20/28/36/41 Side Panels

The NS1S side panels are designed for use with Chief® Raxxess S1 Series racks. See the specific installation instructions provided with the

rack for additional installation information.

TOOLS REQUIRED / PARTS INCLUDED

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS

PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s responsibility to make

sure all components are properly assembled and installed using the instructions provided.

IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing

the side panels.

A (1)

[Side panel]

B (4)

5/32" [security]

(included)

1/4-20 x 1-1/4"

C (1)

5/32"

[security]

NS1S Side Panels Installation

1. Align two bottom tabs in side panel (A) with slots in S1 rack. (See

Figure 1)

Figure 1

2. Attach side panel (A) to S1 rack with four 1/4-20 x 1-1/4" security

buttonhead cap screws (B). (See Figure 2)

Figure 2

3. Tighten four screws (B) using the 5/32" security hex wrench (C).

4. Attach additional side panels as required.

(A)

S1 rack

(NS1S1223 rack shown)

(A)

(B) x 4

(NS1S1223 rack shown)

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	NS1S1223
Kleur van het product:	Zwart
Gewicht verpakking:	12246 g
Soort:	Paneelset
Compatibiliteit:	23" S1
Rackcapaciteit:	12U