Chief LCB1UP Handleiding

Chief Flat panel steun LCB1UP

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief LCB1UP (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

LCB1UP

(Shown installed to CPA Series

extension column as example only)

Back-to-Back Flat Panel Portrait Ceiling Mount

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

LCB1UP

LCB1UP Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located between the mount up to (and

including) the displays does not exceed 250 lbs (113.4 kg)

[125 lbs (56.7 kg) per display].

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

IMPORTANT ! : The LCB1UP

mounts are designed to be

mounted to a 1-1/2" NPT or NPSM following ANSI/ASME

B1.20.1 (Schedule 40, 0.154" minimum thickness steel or

aluminum-ASTM B221) threaded extension column (not

included);

a UL Listed Chief CPA Series extension

column (not included).

NOTE: The LCB1UP mounts are intended to be used with the

UL Listed CPA Ceiling Plates (not included): CPA330,

CPA365, CPA395.

NOTE: The following UL Listed Chief ceiling plates WITHOUT

swaged collars (not included) may also be used:

CMA330, CMA345, CMA395.

--SAVE THESE INSTRUCTIONS--

Installation Instructions LCB1UP

DIMENSIONS

18.38

466.7

MAX MOUNTING PATTERN WIDTH

20.82

528.9

DIMENSIONS: INCHES

[MILLIMETERS]

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	LCB1UP
Kleur van het product:	Zwart
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	113.4 kg
Montage interface compatibiliteit (min):	200 x 100 mm
Montage interface compatibiliteit (max):	200 x 100 mm
Aantal displays ondersteund:	2
Bereik kantelhoek:	-20 - 5 °
Maximale schermgrootte:	60 "
Code geharmoniseerd systeem (HS):	85299097
Minimale schermgrootte:	32 "