Chief KTC440S Handleiding

Chief Flat panel steun KTC440S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KTC440S (16 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

KTC-220 KTC-225

KTC-230

KTC-320

KTC-330 KTC-440 KTC-445

KTC-325

Horizontal and Vertical Desk Clamp Stands

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

KTC SERIES

KTC SERIES Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® and Centris™ are registered trademarks of Milestone

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Failure to keep all mounted equipment directly

above the desk surface at all times can result in serious

personal injury or damage to equipment! All mounted

equipment must remain directly above the surface of the

desk in order to ensure and maintain a stable mount.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the weight of each

monitor attached does not exceed the weight limit for each

specific model. Refer to Table 1 for the weight limits for each

model.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS--

Installation Instructions KTC SERIES

DIMENSIONS

1.96

49.8

.25

6.4

1.90

48.3

3.75

95.3

13.68

347.4 3.63

92.1

2.25

57.2

5.88

149.2

23.83

605.4

13.25

336.6

3.00 [76.2] MAX

.50 [12.7] MIN

2.75

69.9

KTC-220

1.96

49.8

.25

6.4

1.90

48.3

3.75

95.3

17.24

437.8 3.63

92.1

2.25

57.2

6.87

174.6

30.51

774.8