Chief KSA1014B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KSA1014B (6 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000295
2007 Chief Manufacturing
www.chiefmfg.com
07/07
BEFORE YOU BEGIN
Centris Head Accessory
Model: KSA-1014
The KSA-1014 Centris Head Accessory is designed for
use with Chief KSA-Series Swing Arm mounts.
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However,
CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice
or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV
assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Model: KSA-1014 Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! Read and
understand the installation instructions provided with the mount this accessory is being installed on, and thoroughly
understand the mounts weight limits.
Installation Instructions Model: KSA-1014
3
TOOLS REQUIRED FOR INSTALLATION
• Phillips Screwdriver
• 5/32" Hex Wrench
Other tools may be required depending on your method
of installation.
PARTS
After unpacking carton, inspect and verify contents
(See Table 1 and Figure 1). If any listed parts are
missing or damaged, contact Chief Customer Service at
1-800-582-6480.
Table 1: Parts
Item Description Qty
10 Centris Head Assembly 1
20 WASHER, Nylon 1
30 PIN, Pivot 1
40 SCREW, Button Head Cap, 5/16-18 x 4" 1
50* SCREW, Button Head Cap, 5/16-18 x 4 1/2" 1
60 Nut, NYLOCK, 5/15-18 1
70 SPACER 2
80 WASHER, UHMW 1
90 SCREW, Phillips head machine, M4 x 12mm 4
100 SCREW, Phillips head machine, M4 x 20mm 4
110 SCREW, Phillips head machine, M4 x 30mm 4
120 SPACER, Nylon, 1/2 x .194 x 3/8" 4
130 SPACER, Nylon, 1/2 x .194 x 3/4" 4
* Used when installing onan adjustable arm mount.
Figure 1: PARTS
10
20
30
40
50
60
70
80
90 100
110 120
130


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: KSA1014B

Heb je hulp nodig?

Als je hulp nodig hebt met Chief KSA1014B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun