Chief KRA204B Handleiding

Chief Flat panel steun KRA204B

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KRA204B (4 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

Grommet Mounting Kit

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

KRA204

KRA204 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! The KRA204 can ONLY be mounted

onto desks measuring between 3/4" and 4" in depth!

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

DESKTOP THICKNESS

RANGE .75- 4.0" [19.1 - 101.6]

DESK SURFACE

COLUMN FROM MOUNT

SHOWN FOR CLARITY ONLY

(NOT INCLUDED)

Installation Instructions KRA204

TOOLS / PARTS FOR INSTALLATION

ASSEMBLY AND INSTALLATION

1. Remove desk clamp from mount by removing four flat head

cap screws until clamp is disconnected from column. (See

Figure 1)

NOTE: Lower portion of clamp may need to be lowered or

removed in order to gain access to these screws.

Figure 1

2. Use four screws removed in Step 1 to column plate (A) to

column. (See Figure 2)

3. Affix five rubber feet (D) to column plate (A). (See Figure 2)

Figure 2

4. Locate a flat surface (thickness of 3/4" minimum to 4"

maximum) on which to mount the column plate.

5. If mounting hole does not already exist on desk, drill

mounting hole in desk at desired mounting location.

IMPORTANT ! : Mounting hole must be a minimum of

5/16" in diameter and a maximum of 2"!

6. Position mount on desk so that center hole of column plate

(A) is centered over grommet hole. (See Figure 3)

7. Insert 5/16-18 x 5" bolt (C) through grommet bracket (B),

grommet hole and thread into center hole on underside of

column plate (A). (See Figure 3)

Figure 3

8. Tighten 5/16-18 x 5" bolt (C) until grommet bracket (B) is

tightened against underside of desk and column mount is

securely mounted to desk. (See Figure 3)

9. Complete the installation following the mount installation

instructions.

1/2"

(if hole needs to be created)

1/8" A (1)

[column plate]

B (1)

[grommet bracket]

C (1)

5/16-18 x 5"

D (5)

[rubber feet] E (1)

1/8"

x 4

(A)

(D) x 4

(A)

(C)

(B)

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	KRA204B
Kleur van het product:	Zwart
Maximale gewichtscapaciteit:	22.7 kg
Compatibiliteit:	K1C100, K1C200, K2C100, K2C200
Afmetingen (B x D x H):	140 x 140 x 16 mm