Chief K2C22HS Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Chief K2C22HS (20 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalaciĂłn
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
K2C110
K2C220SXF1
K2C22H K2C22HSXF1
K2C120
K2C220
K2C120SXF1
K2C Column Mounts
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
K2C Series
K2C Series Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the K2C Series Monitor Arm
up to (and including) the display does not exceed the weight
limits listed below. Use with products heavier than the
maximum weight indicated may result in collapse of the
mount and its accessories causing possible injury.
--SAVE THESE INSTRUCTIONS!--
MODEL Max Weight
Allowed for EACH
Display
Max Weight
Capacity of
Mounting System
K2C110 22 lbs
(9.98 kg)
22 lbs
(9.98 kg)
K2C120 22 lbs
(9.98 kg)
22 lbs
(9.98 kg)
K2C220 22 lbs
(9.98 kg)
44 lbs
(19.96 kg)
K2C120SXF1 22 lbs
(9.98 kg)
22 lbs
(9.98 kg)
K2C220SXF1 22 lbs
(9.98 kg)
44 lbs
(19.96 kg)
K2C22H 9 lbs
(4.08 kg)
18 lbs
(8.16 kg)
K2C22HSXF1 9 lbs
(4.08 kg)
18 lbs
(8.16 kg)
Installation Instructions K2C Series
3
DIMENSIONS
K2C110
DESKTOP
THICKNESS
RANGE
2.50
0.50
63.5
12.7
3.69
93.7
MANUAL HEIGHT
ADJUST RANGE
TILT RANGE
UP
15 DOWN
6.75
171.5
90
MOUNTING PATTERN
COMPATIBILITY
100 X 100
75 X 75
K2C120
MANUAL HEIGHT
ADJUST RANGE
19.26
12.26
489.2
311.4
TILT RANGE
15 UP
15 DOWN
63.5
0.50
12.7
DESKTOP
THICKNESS
RANGE
2.50
3.69
93.7
6.75
171.5
2.32
59.05.17
131.3
6.75
171.5
90
RANGE
INTERFACE ROTATION
MOUNTING PATTERN
COMPATIBILITY
100 X 100
75 X 75


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: K2C22HS
Kleur van het product: Zilver
Gewicht verpakking: 8000 g
In hoogte verstelbaar: Ja
Montagewijze: Bureau
Maximale gewichtscapaciteit: 13.6 kg
Montage interface compatibiliteit (min): 75 x 75 mm
Montage interface compatibiliteit (max): 100 x 100 mm
Aantal displays ondersteund: 2
Bereik kantelhoek: -10 - 10 °
Maximale schermgrootte: 24 "
Minimale schermgrootte: 10 "

Heb je hulp nodig?

Als je hulp nodig hebt met Chief K2C22HS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun