Chief K1D22HS Handleiding

Chief Flat panel steun K1D22HS

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief K1D22HS (16 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

K1D120 K1D120XXDL

K1D220XXDL

K1D220

K1D22H

K1 Desk Mounts

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

K1D Series

K1D Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the K1D Series Monitor Arm up to

(and including) the display does not exceed the weight limits

listed below. Use with products heavier than the maximum

weight indicated may result in collapse of the mount and its

accessories causing possible injury.

--SAVE THESE INSTRUCTIONS!--

MODEL Max Weight

Allowed for EACH

Display

Max Weight

Capacity of

Mounting System

K1D120 25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1D120XXDL 25 lbs

(11.34 kg)

25 lbs

(11.34 kg)

K1D220 25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1D220XXDL 25 lbs

(11.34 kg)

50 lbs

(22.68 kg)

K1D22H 9 lbs

(4.08 kg)

18 lbs

(8.16 kg)

Installation Instructions K1D Series

DIMENSIONS

K1D120

DESKTOP

THICKNESS

RANGE

2.50

0.50

63.5

12.7

DYNAMIC HEIGHT

ADJUST RANGE

23.20

10.20

589.3

259.1

1.81

46.0

TILT RANGE

10 DOWN

1.83

46.4

MOUNTING PATTERN

COMPATIBILITY

100 X 100

75 X 75

1.81

46.0

DESKTOP

THICKNESS

RANGE

2.50

0.50

63.5

12.7

DYNAMIC HEIGHT

ADJUST RANGE

TILT RANGE

10 DOWN

5.17

131.3

FULL UP/DOWN = MIN

QUICK RELEASE

DELL INTERFACE

K1D120XXDL

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	K1D22HS
Kleur van het product:	Zilver
Gewicht verpakking:	9000 g
In hoogte verstelbaar:	Ja
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	8.16 kg
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	2
Bereik kantelhoek:	-10 - 10 °
Maximale schermgrootte:	24 "
Minimale schermgrootte:	10 "