Chief FSBVB Handleiding

Chief Flat panel steun FSBVB

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief FSBVB (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the
installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation
of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the infor-
mation contained in this document.
Chief Manufacturing, a products division
of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
I N S T A L L A T I O N I N S T R U C T I O N S
8804-000293 RevB
2009 Milestone AV Technologies,
a Duchossois Group Company
www.chiefmfg.com
10/09
BEFORE YOU BEGIN
Display Interface
Model: FSB-V
CAUTION: To prevent damage that could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.
• If you have any questions about this installation, contact Chief Manufacturing.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
Model: FSB-V Installation Instructions
2
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: Failure to provide adequate structural
strength for this component can result in serious
personal injury or damage to equipment! It is the
installer’s responsibility to make sure the structure to
which this component is attached can support five
times the combined weight of all equipment. Reinforce
the structure as required before installing the
component.
TOOLS REQUIRED FOR INSTALLATION
• Phillips Screw Driver
INSPECT MOUNT BEFORE ASSEMBLY
CAUTION: Carefully inspect components for shipping
damage. If damage is apparent, call your carrier claims
agent and do not continue with installation until the
carrier has reviewed the damage. (See Figure 1)
Table 1: Parts
ITEM DESCRIPTION QTY
10 BRACKET, Interface, 100 x 200 1
20 BUTTON, Mounting 4
30 SCREW, Phillips Flat Head, M4 x 12mm 6
40 SCREW, Phillips Flat Head, M4 x 20mm 6
50 SCREW, Phillips Flat Head, M4 x 25mm 6
60 SCREW, Phillips Pan Head, M4 x 10mm 4
70 SCREW, Phillips Pan Head, M4 x 12mm 4
80 SCREW, Phillips Pan Head, M4 x 20mm 4
90 SCREW, Phillips Pan Head, M4 x 25mm 4
100 SCREW, Phillips Pan Head, M4 x 30mm 4
110 SPACER, 3/4" x 1/4" 6
120 SPACER, Nylon 3/4" x 1/2" 6
Figure 1: Parts
10
20
120
30
40 50
60 70 80 90
100
110
Installation Instructions Model: FSB-V
3
INSTALLATION
CAUTION: IMPROPER INSTALLATION CAN LEAD
TO DISPLAY FALLING! Use only hardware provided
and referenced within these instructions. DO NOT
substitute!
Installation For Mounts Equipped With Latching
Flags
To install the FSB-V on Latching Flag Equipped Mounts:
1. Assemble four mounting buttons (20) to interface
bracket (10) using four M4 x 12mm Phillips pan head
screws (70). (See Figure 2)
Figure 2: Assemble Mounting Buttons to Interface
Flush Mount Display Interface Installation
1. Assemble interface bracket assembly (with mounting
buttons) to display using six M4 x 12mm Phillips flat
head screws (30). (See Figure 3)
Figure 3: Interface Installation, (Flush Mount)
Recessed Mount Display Interface Installation
1. Align and place six spacers (110 or 120) over
mounting holes in display back. (See Figure 4)
2. Align and place interface bracket assembly over six
spacers (110 or 120). (See Figure 4)
3. Secure interface assembly to display back using six
M4 x 20mm (40) or six M4 x 25mm (50) Phillips flat
head screws. (See Figure 4)
Figure 4: Interface Installation (Recessed Mount)
10 20
70
Back of Display
Interface Bracket Assembly
(with mounting buttons) 30
(6 places)
Back of Display
Interface Bracket Assembly
(with mounting buttons)
40 or 50
(6 places)
(6 places)
110 or 120

Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: FSBVB

Heb je hulp nodig?

Als je hulp nodig hebt met Chief FSBVB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Flat panel steun Chief

Chief

Chief RXF3 Handleiding

16 April 2024
Chief

Chief PNR2536B Handleiding

9 Juli 2023
Chief

Chief K4G210B Handleiding

9 Juli 2023
Chief

Chief MF26000B Handleiding

9 Juli 2023
Chief

Chief FSB018BLK Handleiding

9 Juli 2023
Chief

Chief TPK1 Handleiding

9 Juli 2023
Chief

Chief PDR2612B Handleiding

9 Juli 2023
Chief

Chief CMA395 Handleiding

9 Juli 2023
Chief

Chief JHSUB Handleiding

9 Juli 2023
Chief

Chief KTG225S Handleiding

9 Juli 2023

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun

Sven

Sven T51-44 Handleiding

26 April 2024
Sven

Sven FS27-88 Handleiding

26 April 2024
Sven

Sven C81-44 Handleiding

26 April 2024
Sven

Sven FS17-21 Handleiding

25 April 2024
Sven

Sven FS31-44 Handleiding

25 April 2024
Sven

Sven F48-64 Handleiding

25 April 2024
Sven

Sven С77-22 Handleiding

25 April 2024
Mount-It!

Mount-It! MI-1879 Handleiding

17 April 2024
Mount-It!

Mount-It! MI-4881 Handleiding

17 April 2024
GPX

GPX TM15 Handleiding

16 April 2024