Chief FSA1015B Handleiding

Chief Niet gecategoriseerd FSA1015B

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief FSA1015B (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 85 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

I N S T A L L A T I O N I N S T R U C T I O N S

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX 952-894-6918

8401 EAGLE CREEK PARKWAY, STE 700

SAVAGE, MINNESOTA 55378 USA

8804-000307

www.chiefmfg.com

03/06

BEFORE YOU BEGIN

19" EQUIPMENT RACK ACCESSORY

Model: FSA-1015

Specifications:

• Designed for equipment rack with 19" wide

vertical attach rails.

• Accommodates the following installation

configurations:

- Direct installation of VESA compliant

display/interface (75x75mm, 100x100mm,

and 100x200mm)

- FWD Cynergy Wall Mount

- FSR and FTR Fusion Wall Mounts

• Weight capacity of 30 lbs (13 kg).

FSA-1015

(Shown with optional Equipment Rack,

FTR, and FWD mounts)

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using

the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious

personal injury, damage to equipment, or voiding of factory warranty.

• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing

at 1-800-582-6480 or 952-894-6280.

Model: FSA-1015 Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is

attached can support five times the combined weight of all equipment. Reinforce the structure as required before

installing the component.

WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of all components attached to the FSA-1015, including the

mount (if required) and display, does not exceed 30 lbs (13 kg).

DIMENSIONS

Installation Instructions Model: FSA-1015

TOOLS REQUIRED FOR INSTALLATION

• #2 Phillips Screwdriver

• 7/16" Wrench (for installation of existing FWD

Wall Mount)

NOTE: Other tools may be required depending on your

method of installation.

PARTS

After unpacking carton, inspect and verify contents (See

Figure 1). If any listed parts are missing or damaged,

contact Chief Customer Service at 1-800-582-6480.

Figure 1: Parts

Table 1: Parts

Item Description Qty

10 BRACKET, Display Mounting 1

20 BRACKET, Side 2

30 SCREW, Phillips Pan Machine, #10-32 x 1/2" 4

40 SCREW, Phillips Pan Machine, #12-24 x 1/2" 4

50 SCREW, Phillips Pan Machine, #10-24 x 1/2" 8

60 SCREW, Phillips Pan Machine, #10-24 x 1-1/4" 2

70 NUT, Nylock, Short, #10-24 4

80 BRACKET, FWD Wall Mount 1

90 SCREW, Phillips Pan Machine, M4 x 12mm 6

100 SCREW, Phillips Pan Machine, M4 x 20mm 6

110 SCREW, Phillips Pan Machine, M4 x 30mm 6

120 SPACER, Nylon, 3/8" 6

130 SPACER, Nylon, 3/4" 6

100

110

120

BAG "A"

BAG "B"

BAG "C"

BAG "D"

130

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	FSA1015B
Kleur van het product:	Zwart
Breedte:	480 mm
Diepte:	178 mm
Hoogte:	178 mm
Maximale gewichtscapaciteit:	13.6 kg
Compatibiliteit:	LCD