Chief DGC65S Handleiding

Chief Flat panel steun DGC65S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief DGC65S (17 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8831-000011 Rev C
©2008 Milestone AV Technologies
www.chiefmfg.com
06/08
I N S T A L L A T I O N I N S T R U C T I O N S
DGC Series Display Guard™ Enclosures
DGC32, DGC42, DGC-50 and DGC-65
The Display Guard series of enclosures are designed to protect flat panel displays in high-risk
environments. The series is available in three sizes:
DGC-32: designed for 32-inch display models
DGC-42: designed for 42-inch display models
DGC-50: designed for 50-inch display models
DGC-65: designed for 65-inch display models
The enclosures are supplied as a fixed wall display enclosure. Accessories, such as the ceiling mount and
post assembly, are sold separately.
These enclosures provide excellent security and protection while providing easy viewing and access for
adjustments and display maintenance. The enclosures are also equipped with a security locks to protect the
display from inadvertent scratches and guard against theft.
Display Guard – Closed Display Guard – Opened
BEFORE YOU BEGIN
CAUTION: To prevent damage to your display and Display Guard, which could affect or void the
Factory warranty, thoroughly study all instructions and illustrations before you begin to install
the mount. Pay particular attention to the Warnings and Cautions in this document.
CAUTION! The maximum weight capacity of the Display Guard fixed wall mounts is located in Table 2.
Chief® is a registered trademark of Milestone AV Technologies, Inc. All rights reserved.
Installation Instructions DGI-42 and DGI-50
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you
do not follow the corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the
structural members can support a redundant weight factor five times the total
weight of the equipment. If not, reinforce the structure before installing the
mount.
WARNING If the Display Guard is not installed correctly, there is the potential for personal
injury or damage to the unit.
WARNING The installer is responsible for verifying that the wall to which the Display
Guard will be anchored will safely support the combined load of all attached
components or other equipment.
WARNING Weight Specifications (see Table 2).
WARNING Watch out for pinch points. Do not put your fingers between movable parts.
WARNING Make sure the mount is correctly oriented.
CAUTION Check the unit for shipping damage before you begin the installation.
CAUTION Use only the bolts that are provided and do not over-tighten the bolts.
EXTERIOR DIMENSIONS
Table 1 and Figure 1 provide the exterior dimensions of the Display Guard.
Table 1. Exterior Dimensions
Description Enclosure Model
Exterior
dimensions 32” 42” 50” 65”
Height 27.63 31.94 36.94 44.38
Width 38.74 47.94 55.94 69.64
Depth 19.55 23.01 23.05 21.21
Specifications are subject to change without notice
Figure 1. Exterior Dimensions of Display Guard
Depth
Height
Width
Installation Instructions DGI-42 and DGI-50
3
WEIGHT SPECIFICATIONS
Table 2 provides the weight specifications for Display
Guard models.
Do not exceed the maximum support weight, defined as
the combined load of all attached components that can be
installed in the Display Guard.
Table 2. Weight Specifications
Model Enclosure Weight
Fixed Wall Mount
Max. Support Weight
DGC-32 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-32 145 lbs (65.78 kg) 400 lbs (181.4 kg)*
DGC-42 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-42 175 lbs (79.38 kg) 400 lbs (181.4 kg)*
DGC-50 155 lbs (70.31 kg) 400 lbs (181.4 kg)*
DGCA-50 195 lbs (88.45 kg) 400 lbs (181.4 kg)*
DGC-65 235 lbs (106.6 kg) 600 lbs (272.2 kg)*
DGCA-65 295 lbs (133.8 kg) 600 lbs (272.2 kg)*
* Fixed wall mount maximum support weight capacity
includes combined weight of display being installed and
enclosure.
TOOLS REQUIRED FOR
INSTALLATION
Allen wrench set
Socket wrench set
NOTE: Other tools may be required depending on your
method of installation.
PARTS LIST
Unpack the shipping carton and check for the contents
listed in Table 3 and shown in Figure 2 on Page 4.
Table 3. Parts List
32” 42” 50” 65”
REF DESCRIPTION QTY QTY QTY QTY
10 GAS SPRINGS 1 1 1 1
20 DISPLAY COVER 1 1 1 1
30 HOUSING with wall brackets 1 1 1 1
40 DISPLAY INTERFACE 1 1 1 1

Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: DGC65S

Heb je hulp nodig?

Als je hulp nodig hebt met Chief DGC65S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Flat panel steun Chief

Chief

Chief RXF3 Handleiding

16 April 2024
Chief

Chief PNR2536B Handleiding

9 Juli 2023
Chief

Chief K4G210B Handleiding

9 Juli 2023
Chief

Chief MF26000B Handleiding

9 Juli 2023
Chief

Chief FSB018BLK Handleiding

9 Juli 2023
Chief

Chief TPK1 Handleiding

9 Juli 2023
Chief

Chief PDR2612B Handleiding

9 Juli 2023
Chief

Chief CMA395 Handleiding

9 Juli 2023
Chief

Chief JHSUB Handleiding

9 Juli 2023
Chief

Chief KTG225S Handleiding

9 Juli 2023

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun

Sven

Sven T51-44 Handleiding

26 April 2024
Sven

Sven FS27-88 Handleiding

26 April 2024
Sven

Sven C81-44 Handleiding

26 April 2024
Sven

Sven FS17-21 Handleiding

25 April 2024
Sven

Sven FS31-44 Handleiding

25 April 2024
Sven

Sven F48-64 Handleiding

25 April 2024
Sven

Sven С77-22 Handleiding

25 April 2024
Mount-It!

Mount-It! MI-1879 Handleiding

17 April 2024
Mount-It!

Mount-It! MI-4881 Handleiding

17 April 2024
GPX

GPX TM15 Handleiding

16 April 2024