Chief CSA100 Handleiding

Chief Niet gecategoriseerd CSA100

Bekijk gratis de handleiding van Chief CSA100 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.9 sterren uit 19.5 reviews. Heb je een vraag over Chief CSA100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/3

I N S T A L L A T I O N I N S T R U C T I O N S

ConnexSys™ Device Holder

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CSA100

CSA100 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the CSA100 does not exceed

10 lbs (4.5 kg).

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

CAUTION: Do not bump CSA100 or its attached

components. If bumped from below the CSA100 may

dislodge from the rail.

IMPORTANT ! : The CSA100 is designed for use on the

LVS1U/LVSXU or LVS1UP/LVSXUP video wall mounting

systems.

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

7.97

8.10

RAIL NOT INCLUDED

1.85

9.04

DIMENSIONS: INCHES

Rail depth in this example: 0.875"

Installation Instructions CSA100

TOOLS / PARTS FOR INSTALLATION

A (1)

[CSA100]

B (1)

[Hook & loop strap - 40"]

C (6)

M4 x 10mm

D (6)

(M4)

ASSEMBLY AND INSTALLATION

NOTE: Components may be attached to the CSA100 (A) either

using the hardware included (C and D), or the hook and

loop strap (B) provided.

NOTE: A power strip may be attached to the side of the

CSA100 ONLY when used in the middle of the LVS1U/

LVSXU, OR if CSA100 is installed on rail outside of

main mount frame. (See Figure 1)

1. If component has a flange: Attach component to CSA100

using Phillips M4 x 10mm screws (C) and M4 nuts (D).

Proceed to Step 3.

2. If component does not have an attachment point: Attach

component to CSA100 using hook and loop strap (B). Cut

strap to length as necessary.

3. Complete the installation by hanging CSA100 on the lower

part of the LVS1U/LVSXU or LVS1UP/LVSXUP wall rail

between displays. (See Figure 1)

Figure 1

CAUTION: Do not bump CSA100 or its attached

components. If bumped from below the CSA100 may

dislodge from the rail.

Attach power strip

on this edge

wall rail

Product specificaties

Merk:	Chief
Categorie:	Niet gecategoriseerd
Model:	CSA100
Kleur van het product:	Zwart
Gewicht:	1000 g
Breedte:	202 mm
Diepte:	38 mm
Hoogte:	250 mm
Maximale gewichtscapaciteit:	4.53 kg
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	ConnexSys
Type product:	Apparaatplaat