Chief CMA151 Handleiding

Chief Flat panel steun CMA151

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief CMA151 (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8803-000073 Rev A
2006 Chief Manufacturing
www.chiefmfg.com
02/06
BEFORE YOU BEGIN
1-1/2" to 1" NPT Adapter Accessory
Model: CMA-151
Specifications:
• Adapts a 1-1/2" NPT threaded fitting to a 1" NPT
threaded column.
• Intended for use with Chief CMA Series
accessories and RPA Series mounts.
NOTE: U.L. listed assemblies require the use of U.L.
listed components.
• Weight capacity of 250 lbs (113 kg).
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
Model: CMA-151 Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of all components located between the CMA-151 up to
(and including) the display/projector does not exceed 250 lbs (113 kg).
• The weight capacity of the CMA-151 may be LIMITED to the lowest weight capacity of any other component
located between the CMA-151 and the supporting structure!
DIMENSIONS
TOOLS REQUIRED FOR INSTALLATION
• Pipe Wrench
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
INSTALLATION
1. Screw adapter (10) onto 1" NPT threaded column by
hand.
2. Screw 1" NPT threaded column, with adapter (10),
into 1-1/2" NPT threaded fitting. Tighten securely
using pipe wrench.
Table 1: Parts
Item Description Qty
10 Adapter, 1-1/2" to 1" NPT 1
COLUMN, Threaded, 1" NPT
(required, not supplied)
1
FITTING, Threaded, 1-1/2" NPT
(required, not supplied)
1
10

Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: CMA151

Heb je hulp nodig?

Als je hulp nodig hebt met Chief CMA151 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Flat panel steun Chief

Chief

Chief RXF3 Handleiding

16 April 2024
Chief

Chief PNR2536B Handleiding

9 Juli 2023
Chief

Chief K4G210B Handleiding

9 Juli 2023
Chief

Chief MF26000B Handleiding

9 Juli 2023
Chief

Chief FSB018BLK Handleiding

9 Juli 2023
Chief

Chief TPK1 Handleiding

9 Juli 2023
Chief

Chief PDR2612B Handleiding

9 Juli 2023
Chief

Chief CMA395 Handleiding

9 Juli 2023
Chief

Chief JHSUB Handleiding

9 Juli 2023
Chief

Chief KTG225S Handleiding

9 Juli 2023

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun

Sven

Sven T51-44 Handleiding

26 April 2024
Sven

Sven FS27-88 Handleiding

26 April 2024
Sven

Sven C81-44 Handleiding

26 April 2024
Sven

Sven FS17-21 Handleiding

25 April 2024
Sven

Sven FS31-44 Handleiding

25 April 2024
Sven

Sven F48-64 Handleiding

25 April 2024
Sven

Sven С77-22 Handleiding

25 April 2024
Mount-It!

Mount-It! MI-1879 Handleiding

17 April 2024
Mount-It!

Mount-It! MI-4881 Handleiding

17 April 2024
GPX

GPX TM15 Handleiding

16 April 2024