Chicco Bravo Rubber Wheel Kit Handleiding

Chicco Niet gecategoriseerd Bravo Rubber Wheel Kit

Lees hieronder de 📖 handleiding in het Nederlandse voor Chicco Bravo Rubber Wheel Kit (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
WARNING: Avoid serious injury or death to your child. Never
use your Bravo Stroller without Wheels PROPERLY attached!
You must read and understand the Rubber Wheel Accessory Kit
instructions and the instructions in the User Guide. If you do not
understand these instructions, DO NOT attempt to attach the
Wheels,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
Bravo Rubber Wheel Accessory Kit
IMPORTANT: Please also refer to the instructions
that came with your product.
Remove the Front Wheels by pushing in on the
Release Button, just above the wheel (as shown). And,
at the same time, pull the Front Wheel off of the Stroller
Frame. Repeat for the other Front Wheel.
1 On one side of the stroller remove the Rear Wheel
Hubcap using a flat blade screwdriver, as shown.
Discard
the old Hubcap.
2
1
SS0014E_01
Remove the Pin from the Rear Axle using a at blade
screwdriver, as shown.
Discard the old Pin.
3 4
Remove the Washer from ther Rear Axle.
Discard the
old Washer.
Kit Includes:
TO REMOVE FRONT AND REAR WHEELS:
Tools Needed: Flat Blade Screwdriver
(1/8” wide)
Line up the tabs on the Hubcap with the holes on the
Wheel. Snap the Hubcap onto the Wheel to cover the
Washer and Pin. Repeat Steps 6-9 for other side. Pull on
each Wheel to make sure the Wheel assembly is securely
attached to the frame.
Attach the Front Wheel to the Stroller Frame, line up and
insert the Front Wheel Pin into the corresponding opening
on the Stroller Front Leg, as shown. Repeat for the other
side.
Make sure both Front Wheels are secure by pulling down
on Wheel assemblies.
10
WARNING: Check that the wheels are tted correctly. Pull on Wheels after installation is
complete. Make sure all wheels are properly attached. If you have a problem, retry these instructions
provided AND review your User Guide. If you still have problems, STOP, Do Not use the Bravo Stroller,
and call Chicco at 1-877-424-4226.
2
CLICK!
¡CLIC!
TO ATTACH NEW RUBBER WHEELS ACCESSORY KIT:
On the same side, slide a Washer onto the Rear Axle. Secure the Wheel to the Rear Axle using the Pin. Push
the straight side of the Pin through the hole on the
Rear Axle. The curve on the Pin must curve around the
outside of the Rear Axle, as shown. Make sure Washer is
between the Pin and Wheel.
8
9
Remove the Wheel from the Rear Axle.
Discard the old
Wheel.
Repeat Steps 2-5 for other Rear Wheel.
5 On one side of the Rear Axle, slide on a Rear Wheel.
You may need to turn the Wheel until the brake tab fits
into one of the grooves on the Wheel if the brake lever is
down.
6
7


Product specificaties

Merk: Chicco
Categorie: Niet gecategoriseerd
Model: Bravo Rubber Wheel Kit

Heb je hulp nodig?

Als je hulp nodig hebt met Chicco Bravo Rubber Wheel Kit stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chicco

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd