Chef CS602S Handleiding

Chef Afzuigkap CS602S

Lees hieronder de đź“– handleiding in het Nederlandse voor Chef CS602S (4 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
AR500FS
Rear Exhaust
to atmosphere
Side Exhaust
to atmosphere
Recirculating
Installation
Top Exhaust
to atmosphere
AR125RC
AR125F
AR125FD
Roof cowl
Flue
1200mm length
Alternative flue connection
1 metre flexible duct with joiners
Flashing
Not Supplied
90Âş bend
AR125B
AR500RK
AR125WV
Wall vent
(includes 400mm of flue)
600-900 Canopy Installation and Operation Manual
The instructions in this manual are for cooker hood models: CS601S,CS602S, CS902S, CS901S, WRF600, WRF600CS, WRF900CS,
WRG630CW,WRG630CS,WRG930CW,WRG930CS,RCD690S,RCD990S
Safety Warnings
Electrical Connection
Accessories
Cleaning
Part Numbers: Description:
These cooker hoods are domestic appliances which have been manufactured and tested to comply with Australian and New Zealand
Standard AS/NZS 3350.2.31.
These appliance are intended to be used in household and similar applications such as: Staff kitchen areas in shops, ofîšżces and other
working environments; Farm Houses; By clients in hotels, motels and other residential type environments; Bed and breakfast type
environments.
This appliance is not intended for used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Ensure the cooker hood is switched o before carrying out maintenance, to avoid any possibility of electric shock.
Grease îšżlters must be removed every four weeks (maximum) for cleaning to reduce the risk of îšżre.
Do not amb’e under the cooker hood.
This cooker hood is not recommended for barbeques.
The exhaust air from the cooker hood must not be discharged into any heating ue, which may carry combustion products from other sources.
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when the cooker hood is used at the same time as appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when the cooker hood is in use.
Always switch o gas burners before you remove pots or pans.
CAUTION: Accessible parts may become hot when used with cooking appliance.
Regulations concerning the discharge of air have to be fulîšżlled.
Check that the mains voltage matches with the voltage on the data plate inside the cooker hood.
Check that the installation complies with standards of local gas and electricity authorities.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualied person in order to avoid a hazard.
Use 125mm round exhaust ducting for best performance.
When using exible duct always install duct with the wire helix pulled taut to minimise pressure loss.
Try to keep exhaust duct short and straight.
Keep bends in the exhaust duct to a minimum.
Do not reduce the size or restrict exhaust duct.
Wipe the cooker hood body and ue with a sponge or soft cloth soaked in warm soapy water. Do not use oven cleaners or other abrasive materials.
AR125RC
AR125B
AR125F
AR125FD
AR125VW
AR500FS
AR500RK
AR500CF
Roof Cowl
90Âş Bend
Flue 1200mm Long
Flexible Duct - 1 Metre Long When Expanded
Wall Vent Kit
Extra Length Flue Cover 1100mm Length Brushed Stainless Steel
Recirculating Kit
Replacement Carbon Filters
DUCTING ACCESSORIES
INSTALLATION OPTIONS
Page 1
203203
(600 model)
(600 model)
C
L
Hood base
Top of hob
MINIMUM:
600 electric
650 gas
MAXIMUM:
800 mm
245
75 75
65 65
38 303303
600 models as per this diagram with these dimensions the only variables
490
B
Page 2
Warning: Failure to install the screws or xing device in accordance with these instructions may result in electrical hazards.
COMPONENTS LIST
COMPONENTS NOT INCLUDED
Diagram B:
INSTALLING THE COOKER HOOD
NOTE:
NOTE:
1 body assembly with grease îšżlters
(900-3 grease îšżlters / 600-2 grease îšżlters)
1 telescopic ue cover set
2 cover ue mounting brackets
1 instruction book
1 plastic bag containing screws for îšżxing
telescopic ue covers
1 plastic duct transition: oblong to round
Fixings required to attach cover ue
mounting brackets to wall
Fixings required to attach the cooker hood
to wall
Recommended working heights.
Cover ue mounting bracket locations.
Telescopic cover ue xing points.
Before installing the cooker hood, peel o any
protective plastic covering.
Remove polystyrene packaging from inside
behind fan motor.
(Diagrams C )
Some installations may require telescopic
ue cover cut to length. Cut with tin snips or
a îšżne-tooth hack saw blade, taking care not
to distort or dent ue cover.
The maximum space between the wall and
screw top is 5mm.
If the instructions of the hob
specify a greater distance than
the minimum, then that shall
be the minimum height for the
installation
DIMENSIONS ARE IN MILLIMETRES
A
222
165
230
500
600/900
20
max)
1240(
540
470(max)
C
E
FF
G
D
RECOMMENDED INSTALLATION SEQUENCE COOKER HOOD OPERATION
Diagram D
Slide switch controls:
Replacing lamps:
Press button switch controls
Maintenance:
Diagram E
NOTE:
Install cooker hood body.
Determine working height, mark
wall to suit.
Install cover ue mounting
brackets.
Light switch:
Extractor fan switch:
Slide position I:
Slide position 2:
Slide position 3:
Ensure the appliance is switched off before carrying out
maintenance, to avoid any possibility of electric shock. Remove
grease îšżlter to replace lamp. Replace with 40W (maximum) E14
candle lamp.
Light switch: Depress
light button to turn light
ON. Press light button to
turn light .OFF
Clean grease îšżlters
every three to four weeks
maximum.
Greasy îšżlters are a îšżre
risk.
Remove the grease îšżlters,
soak and agitate in hot
soapy water.
Rinse, drain and shake
well before replacing
îšżlters.
Do not use oven cleaners
or other caustic materials.
Extractor fan switch
interlocked switching:
Select a fan speed,
depress button to turn
fan . Press button ( ) ON O
to turn fan .OFF
Fix duct transition to cooker hood
body.
Install internal exhaust duct to suit
installation type.
Best results are obtained by using a low fan speed for normal
conditions and a high fan speed when odours are more
concentrated. Turn the hood on a few minutes before you start
cooking. It should by left on after cooking for about 15 minutes or
until all odours have disappeared.
This product is îšżtted with a safety cutout device. If the cooker hood
is installed to close to the cooktop, ambe cooking, operating the
cooktop without cooking utensils and blocked îšżlters may activate
the safety cutout device. if the hood stops during operation, correct
the faults and allow time for the safety cutout device to reset, the
cooker hood will then function correctly.
Page 3
Diagram(s) F
Diagram G
Install bottom section of
telescopic ue cover.
Install top section of
telescopic ue cover.
This switch is used to turn the
light îšżtted in the hood on and off.
Used to select fan speeds.
Fan speed Low
Fan speed Medium
Fan speed High
- - - - - - - - - - - - - -
- - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
IMPORTANT: The Edison Screw lamps may have come loose
during transportation. Ensure that lamps are tightened îšżrmly
into the socket before power is applied.
3
2
0
0


Product specificaties

Merk: Chef
Categorie: Afzuigkap
Model: CS602S

Heb je hulp nodig?

Als je hulp nodig hebt met Chef CS602S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afzuigkap Chef

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap