Chauvet STRIKE Array Flush Bracket Handleiding

Chauvet Niet gecategoriseerd STRIKE Array Flush Bracket

Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet STRIKE Array Flush Bracket (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
Quick Reference Guide
Model ID: STRIKEARRAYFLUSHBRACKET
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
Strike Array Flush Bracket QRG Rev. 2
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the Strike Array Flush Bracket.
What is Included
Mounting
Before mounting this product, read the Safety Notes. Make sure the mounting clamps are capable of supporting the
weight of the product. For the Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
• ALWAYS:
• Use a safety cable when mounting this product overhead.
• DO NOT:
• Leave any flammable material within 50 cm of this product while operating.
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where normal temperatures exceed the temperature ranges in this manual.
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• In the event of a serious operating problem, stop using immediately.
• Strike Array Flush Bracket
• Quick Reference Guide
Safety cable
Mounting clamp
Strike Array
Flush Bracket
EN
2
Strike Array Flush Bracket QRG Rev. 2
QUICK REFERENCE GUIDE
Mounting Strike Array Products Attached in Series
The Strike Array Flush Bracket can support up to 16 cells or 4 Strike Array products. Do not exceed!
Attach the
safety cable
of the first
product to
the
mounting
point
Attach the
safety cables
of the
following
products to
the
preceding
product
Up to
16 cells
Strike Array
Flush Bracket


Product specificaties

Merk: Chauvet
Categorie: Niet gecategoriseerd
Model: STRIKE Array Flush Bracket

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet STRIKE Array Flush Bracket stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chauvet

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd