Chauvet RDM2go Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet RDM2go (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
RDM2go EN QRG
2
About This
Guide
The RDM2go Quick Reference Guide (QRG) has basic product information such as
connection, menu options, and DMX values. Download the User Manual from
www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Limited
Warranty
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND
CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-
registration
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration/
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in and subject to the
exclusions a
nd limitations set forth in, the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable.
To exercise rights under this warranty, you must provide proof of purchase in the
form of an
original sales receipt from an authorized dealer that shows the product
name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES. This warranty gives you specific legal rights. You may also have
other rights that vary from state to stat
e and country to country. This warranty is
valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in
other countries, please consult your local distributor.
Safety Notes
• DO NOT open this product. It contains no user- serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power by unplugging it.
• DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
• CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
• The product is not intended for permanent installation.
• DO NOT operate this product outdoors or in any location where dust, excessive
heat, water, or humidity may affect it. (IP20)
• DO NOT operate this product if the housing, screen or cables appear damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
• Caution: Using product in lower temperature environments may affect battery
life or battery efficiency.
Contact
Outside the US, United Kingdom, Ireland, France, Germany, Mexico, or Benelux,
contact your distributor to request support or return a product. Visit
www.chauvetdj.com .for contact information
RDM2go EN QRG
3
What Is
Included
• RDM2go
• Carry Pouch
• 2 pc, 3- - to 5 pin converters
• 5- pin male to bare wire adaptor
• USB-A Male to Micro USB-B Male (3 ft)
• Quick Reference Guide
D C Power
plug the included cable into any USB- fA emale outlet. P -lug the Micro USB
end into the female socket located on top of the product.
use completely disconnect the product from power by unplugging it.
DMX Linking
located at the bottom of the product. The RDM2go comes with 2 adaptors, which
will convert the 5- -pin DMX serial connections to 3 pin connections.
Manual for information about connecting and configuring the product for DM
DMX
Connection
DMX-512A protocol. This product can send, receive, and record DMX.
Manual for more information about connecting and configuring the product
RDM
(Remote
Device
Management)
devices to communicate bi-
supports RDM protocol that allows feedback to monitor and change
options on products that support this feature
www.chauvetprofessional.com for more details.
Ilumicode
connection located at the bottom of the product
included with this product and your Iluminarc product.


Product specificaties

Merk: Chauvet
Categorie: Niet gecategoriseerd
Model: RDM2go

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet RDM2go stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chauvet

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd