Chauvet Ovation C-640FC Handleiding

Chauvet Niet gecategoriseerd Ovation C-640FC

Lees hieronder de đź“– handleiding in het Nederlandse voor Chauvet Ovation C-640FC (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
Ovation™ C- 640FC QRG EN
2
About this
Guide
The Ovation™ C-640FC Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from www.chauvetprofessional.com
for more
details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Safety Notes
• DO NOT open this product. It contains no user- serviceable parts.
• DO NOT look at the light source when the product is on.
• To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
• CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
• CAUTION: This product’s housing hot when lights are may be
operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket or the handles to carry this s
product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 5 °F (4 °C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. Visit
www.chauvetprofessional.com for contact information.
What Is
Included
• Ovation™ C-640FC
• Neutrik® powerCON®
power cord
• 2 Omega Brackets
( 135 x 245 mm)
• Warranty Card
Ovation™ C- 640FC QRG EN
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100-240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the
product from power via
breaker or by unplugging it.
Power Linking
You can link up to 9 -Ovation™ C 640FC products at 120 VAC or
18
at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation™ C-640FC will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Connection
The Ovation™ C-640FC uses a regular DMX data connection for its DMX
personalities: TOUR, TR16 ARC.1 AR1., , D, ARC.2, ARC.3, AR3.D, AR3.S,
PIX1 PIX3 PX16, , ,and HSV
. See the User Manual to connect and configure
for DMX operation.
Note: For optimum control of the 16-
bit dimming channels in the TR16
personality, be sure that the dimming curve in SET > DIMX is set to OFF.
Master/Slave
Connection
The Ovation™ C 640FC uses the DMX data connection for its Master/Slave -
mode. See the
User Manual to connect and configure for Master/Slave
operation.


Product specificaties

Merk: Chauvet
Categorie: Niet gecategoriseerd
Model: Ovation C-640FC

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet Ovation C-640FC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chauvet

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd