Chauvet Freedom Charge 8 Handleiding

Chauvet Niet gecategoriseerd Freedom Charge 8

Lees hieronder de đź“– handleiding in het Nederlandse voor Chauvet Freedom Charge 8 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 111 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Page 1
Freedom Charge 8 Instruction Guide Rev. 2
Description
The Freedom Charge 8 is a compact and stackable road case that has eight padded storage
compartments and built-in cable whips to safely transport and charge up to eight Freedom Par products.
Overview
Operation
The Freedom Charge 8 road case can charge up to eight Freedom Par products simultaneously.
1. Unlock case and open the lid.
2. Use built-in latch to hold the lid open.
3. Connect road case to a power outlet.
4. Insert Freedom Par products face down into compartments.
5. Connect Freedom Par products to built-in cable whips.
• Keep the lid open while charging the Freedom Par products inside the road case.
• Do not stack cases while charging.
• Always connect to a protected circuit with an appropriate electrical ground to
avoid the risk of electrocution or fire.
• Never connect to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
• Lid must be locked in the open position using the built-in latch.
Freedom Par product
Compartments
Built-in cable whips
Power in
Fuse
Built-in latch
Page 2 Freedom Charge 8 Instruction Guide Rev. 2
Product Dimensions
AC Power
The Freedom Charge 8 can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
Fuse Replacement
The road case comes with a replaceable fuse (F 5A, 250 V). To change the fuse on the road case, do the
following:
1. Disconnect the product from the power outlet.
2. Use a flathead screwdriver to remove the blown fuse from the holder, and replace it with a fuse of the
exact same type and rating.
3. Insert the fuse holder back in place and reconnect power.
Compatible Products
• Freedom Par Hex-4
• Freedom Par Quad-4
• Freedom Par Quad-4 IP
• Freedom Par Tri-6
20 in
508 mm
20 in
508 mm
20 in
508 mm
15.75 in
400 mm
Page 3
Freedom Charge 8 GuĂ­a de Instrucciones Rev. 2
DescripciĂłn
El Freedom Charge 8 es una maleta compacta y apilable que tiene ocho compartimentos de
almacenamiento acolchados y látigos de cable integrados para transportar y cargar de forma segura hasta
ocho productos Freedom Par.
Vista general
Funcionamiento
La maleta de carretera Freedom Charge 8 puede cargar hasta ocho productos Freedom Par
simultáneamente.
1. Desbloquee la caja y abra la tapa.
2. Use el pestillo incorporado para mantener la tapa abierta.
3. Conecte la caja de la carretera a la alimentaciĂłn.
4. Inserte bocabajo los productos Freedom Par en los compartimentos.
5. Conecte los productos Freedom Par a los latiguillos de cable integrados.
• Mantenga la tapa abierta mientras carga los productos Freedom Par dentro de la
caja del camino.
• No apile cajas durante la carga.
• Conecte siempre a un circuito protegido con una toma de tierra eléctrica
apropiada para evitar el riesgo de electrocuciĂłn o incedio.
• Nunca conecte
a un reostato (resistor variable) o circuito de atenuaciĂłn, incluso
si el canal del reostato o atenuador sirve solo como conmutador 0 a 100%
.
• La tapa debe bloquearse en la posición abierta utilizando el pestillo incorporado.
Producto Freedom Par
Compartimientos
Látigos incorporados
Corriente de entrada
Fusible
Pestillo
incorporado


Product specificaties

Merk: Chauvet
Categorie: Niet gecategoriseerd
Model: Freedom Charge 8

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet Freedom Charge 8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Chauvet

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd