Chauvet EZ Gobo Handleiding
Chauvet
Effect machine
EZ Gobo
Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet EZ Gobo (44 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/44
Quick Reference Guide
EZgoboâ„¢ QRG EN
2
About This Guide
The EZgoboâ„¢ Quick Reference Guide (QRG) has basic product information.
Disclaimer
The information and specifications in this QRG are subject to change without
notice.
Safety Notes
The following Safety Notes include important information about installation, use,
and maintenance.
• Always connect the product to a grounded circuit.
• Make sure the power cord is not crimped or damaged.
• Always disconnect the product from the power source before cleaning it.
• Never disconnect the product from the power source by pulling or tugging on
the cord.
•
If mounting the product overhead, make sure there is adequate support for the
product’s weight and always secure the product using a safety cable.
• Make sure there are no flammable materials close to the product when it is
operating.
• Avoid direct eye exposure to the light source while the product is on.
•
Do not touch the product’s housing when the product is operating because the
housing can be very hot.
• The product is not intended for permanent installation.
• The product is for indoor use only. It is rated at IP20.
• Do not expose the product to rain or moisture.
• Always connect the product to a power source that is within the voltage range
stated on the label or rear panel of the product.
• Never connect the product to a dimmer or rheostat.
• Always install the product in a location with adequate ventilation.
• Always leave at least 20 in (50 cm) between the product and adjacent
surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Do not operate the product at an ambient temperature higher than
104 ° ° . F (40 C)
• Never carry the product by the power cord or any moving part.
• Always use the mounting clamp or carry handle to lift the product.
• If there is a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by untrained people can
lead to damage or malfunction.
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Contact
• From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the
distributor of record to request support or return a product.
• From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information
in Contact Us at the end of this QRG.
EZgoboâ„¢ QRG EN
3
What Is Included
• EZgobo™
• External Power Supply
• 10 pack of wedding- ready gobos
• IRC-6
• Warranty c ard
• Quick Reference Guide
To Begin
Carefully unpack the EZgoboâ„¢ and check that all the parts are in the package,
and are in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs
of mishandling, save all the
packaging and file a claim with the carrier
immediately, do not notify Chauvet
. Failure to report damage to the carrier
immediately, or failure to have all the packaging available for inspection, could
invalidate the claim.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with C hauvet
within 7 days of
delivery. For information on contacting C hauvet ee , s Contact Us at the end of this
QRG.
Description
The EZgoboâ„¢ , is a lightweight battery-powered gobo projector that comes
attached to a magnetic bracket with a scissor clip
for a variety of mounting
options. It comes with 10 wedding- -ready gobos for a variety of wedding themed
looks. The EZgobo 10â„¢ has a
watt LED that can safely project through a colored,
transparency gobo for long periods of time. This product
has zoom and focus
knobs to adjust the size of the gobo projection. It is compatible with the included
IRC- 6.
Overview
Gobo Holder
And
Mounting
Zoom Knob
Tilt
Adjustment
Knob
IR Sensor
Focus Knob
Rear View
Scissor Clip
(detachable)
DC Power
On/Off
Switch
Magnetic
Base
Safety
Loop
Front
Product specificaties
| Merk: | Chauvet |
| Categorie: | Effect machine |
| Model: | EZ Gobo |
Heb je hulp nodig?
Als je hulp nodig hebt met Chauvet EZ Gobo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Effect machine Chauvet
9 Juli 2023
9 Juli 2023
8 Juli 2023
8 Juli 2023
8 Juli 2023
8 Juli 2023
7 Juli 2023
7 Juli 2023
7 Juli 2023
7 Juli 2023
Handleiding Effect machine
- Effect machine BeamZ
- Effect machine Behringer
- Effect machine HQ
- Effect machine HQ Power
- Effect machine Konig
- Effect machine Manta
- Effect machine Martin
- Effect machine Max
- Effect machine Midas
- Effect machine Monacor
- Effect machine Nedis
- Effect machine Pyle
- Effect machine Showtec
- Effect machine Velleman
- Effect machine Viking
- Effect machine JB Systems
- Effect machine Monoprice
- Effect machine NGS
- Effect machine Steren
- Effect machine Eurolite
- Effect machine American DJ
- Effect machine Antari
- Effect machine QTX
- Effect machine Karma
- Effect machine Adj
- Effect machine Elation
- Effect machine Fredenstein
- Effect machine TC Electronic
- Effect machine Elysia
- Effect machine Stairville
- Effect machine Laserworld
- Effect machine TCM FX
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Blizzard
- Effect machine Hazebase
- Effect machine IGS Audio
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine DJPower
- Effect machine Doepfer
- Effect machine Fun Generation
- Effect machine Lotronic
- Effect machine IMG Stage Line
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
Nieuwste handleidingen voor Effect machine
26 Februari 2024
19 Februari 2024
19 Februari 2024
7 Februari 2024
7 Februari 2024
7 Februari 2024
7 Februari 2024
6 Februari 2024
6 Februari 2024
2 Februari 2024