Chauvet ÉPIX Strip IP Handleiding

Chauvet Heater ÉPIX Strip IP

Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet ÉPIX Strip IP (28 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
1
EN
QUICK REFERENCE GUIDE
ÉPIX Strip IP QRG Rev. 4
About This Guide
The ÉPIX Strip IP Quick Reference Guide (QRG) has basic product information such as connection and mounting.
Download the ÉPIX Drive 2000 IP User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
CAUTION: This product’s housing may be hot when lights are operating.
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
CAUTION: This product’s housing may be hot when lights are operating.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
USE a safety cable when mounting this product overhead.
DO NOT submerge this product (IP65). Temporary outdoor operation is fine.
When using this product in an outdoor environment, use IP65 (or higher) rated power and data cables. Be sure to
secure unused power and data ports with attached IP65 covers.
DO NOT operate this product if the housing, ports, or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to an ÉPIX Drive 2000 IP or an ÉPIX Drive 900.
Only use the hanging/mounting bracket to carry this product.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request
support or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
ÉPIX Strip IP
Square Milky Filter (Installed)
Black Stealth Filter
Round Milky Filter
Quick Reference Guide
EN
2
ÉPIX Strip IP QRG Rev. 4
QUICK REFERENCE GUIDE
Product Overview
Product Dimensions
Power
This product is powered by an ÉPIX Drive 2000 IP. Refer to the ÉPIX Drive 2000 IP User Manual for detailed instructions
on how to connect this product to power.
Power Linking
You can link up to 10 ÉPIX Strip IP products to each port of an ÉPIX Drive 2000 IP. Never exceed this number.
Scrambled Pulse-Width Modulation
This product features Scrambled-PWM (S-PWM) technology, which de-synchronizes the pulse widths of each color of the
multi-color LEDs. This ensures that there is always some LED output, reducing flicker, and maintaining the same
grayscale performance.
Use ONLY IP65 4-pin XLR cables with the ÉPIX Strip IP. For our CHAUVET Professional line of
IP65 4-pin XLR cables, go to https://www.chauvetprofessional.com/accessories.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect
the ÉPIX Drive 2000 IP from power via breaker or by unplugging it.
Data/Power In
Bracket Position Adjustment Knobs
(used to align end to end on truss)
Interlocking
Hardware
Mounting Bracket
Fastening Knob/
Safety Loop
Data/Power Out
Filter
39.37 in
1000 mm
7.04 in
178.9 mm
3.15 in
80 mm
1.33 in
34 mm
1.42 in
36 mm 3.46 in
88 mm
3.27 in
83 mm
2.05 in
52 mm
5.04 in
128 mm


Product specificaties

Merk: Chauvet
Categorie: Heater
Model: ÉPIX Strip IP

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet ÉPIX Strip IP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Chauvet

Handleiding Heater

Nieuwste handleidingen voor Heater