Chamberlain 950EV Handleiding
Chamberlain
Garagepoortopener
950EV
Lees hieronder de đ handleiding in het Nederlandse voor Chamberlain 950EV (2 pagina's) in de categorie Garagepoortopener. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
1-BUTTON REMOTE CONTROL MODEL 950EV
To prevent possible SERIOUS INJURY or DEATH from a moving gate
or garage door:
⢠ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote controls.
⢠Activate gate or door ONLY when it can be seen clearly, is properly
adjusted and there are no obstructions to door travel.
⢠ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate orîdoor.
Your remote control is designed for use with garage door openers
manufactured starting January 1, 1993 that have a LEARN button.
The images throughout this manual are for reference only and your
product may look different.
BEFORE YOU START
Locate the LEARN button on the garage door opener, and then locate the
program button on the remote control.
IMPORTANT: The remote will activate your door or gate during
programming. Be sure the door is clear of ALL obstructions. Start with the
garage door closed. Make sure the garage door opener has a working light
because it is a programming indicator.
PROGRAM TO GARAGE DOOR OPENERS WITH A
YELLOW LEARN BUTTON
If your remote was previously programmed to another type of opener,
follow the programming instructions for PROGRAM TO ALL GARAGE
DOOR OPENERS below to reprogram to a yellow LEARN button.
1. Start with the garage door closed.
2. Press and immediately release the yellow LEARN button. The Learn
LED glows steady for 30 seconds. Within 30 seconds...
1. Press and hold the button on the remote control.
2. Release the button when the garage door opener lights blink or two
clicks are heard.
3. Test by pressing the button you just programmed. The opener
activates.
PROGRAM TO ALL GARAGE DOOR OPENERS
1. Press and hold the program button with the visor clip until the LED on
the front of the remote control turns on.
2. Press and release the remote control button the number of times that
corresponds with the garage door opener type. NOTE: Make sure the
LED stops flashing between each press of the button.
# of Presses Garage Door Opener Type
1 Yellow LEARN Button (Security+ 2.0ÂŽ)
2 Purple LEARN Button (315MHz Security+ÂŽ)
3 Red/Orange LEARN Button (390MHz Security+ÂŽ)
4 Green LEARN Button (390MHz Billion Code)
3. Press the program button with the visor clip until the LED on the front
of the remote turns off.
4. Choose from Options A, B, C, or D to complete programming.
Option A: Program Using the Push Button Door Control
5. Press and hold the light button and the push button until the push
button LED begins to blink.
6. Press and hold the button on the remote until the garage door lights
blink or two clicks are heard. Release the button. Programming is
complete.
7. Test by pressing the button you just programmed. The opener
activates.
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer or
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Green or Red/Orange
LEARN Button
Purple
LEARN Button
Yellow
LEARN Button
Learn LEDLearn LED Learn LED
Program Button
Push Button Light Button
LED
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first consumer purchaser of
this product that it is free from defect in materials and/or workmanship for
a period of 1 year from the date of purchase.
REPLACEMENT PARTS
Description Part Number
3V 2032 Lithium battery K010A0020
Visor Clip K029B0137
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)îthis device
must accept any interference received, including interference that may cause undesired operation.
The lithium battery should produce power
for up to 5 years. If the remote controlâs
LED will not flash when the button is
pressed, replace the battery.
1. Pry open the case with the visor clip,
first in the middle (1), then at each
side (2 and 3).
2. Remove the old battery. Dispose of
old batteries properly.
3. Insert replacement batteries positive
side up. Replace the batteries with
only 3V CR2032 coin cell batteries.
4. Replace the cover.
Š 2020, The Cahmberlain Group Inc.
114-5496-000 All Rights Reserved www.chamberlain.com
PROGRAM TO ALL GARAGE DOOR OPENERS
(CONTINUED)
Option B: Program Using the Smart Control Panel
5. On the Smart Control Panel, press the MENU button.
6. Use the arrow buttons to scroll to âPROGRAMâ, and select to
the next screen.
7. Scroll down to âREMOTE,â and select .
8. Press and hold the button on the remote until the garage door lights
blink or two clicks are heard. Release the button. Programming is
complete.
9. Test by pressing the remote control button you just programmed. The
opener activates.
Option C: Program Using the Multi-Function Door Control or
Motion Sensing Door Control
5. On the door control, press the LEARN button twice.
6. Press and hold the button on the remote until the garage door lights
blink or two clicks are heard. Release the button. Programming is
complete.
7. Test by pressing the button you just programmed. The opener
activates.
Option D: Program Using the Garage Door Opener
5. Press and release the LEARN button on the garage door opener. The
Learn LED will light. Within 30 seconds...
6. Press and hold the remote control button until the garage door opener
lights flash or two clicks are heard. Release the button. Programming
is complete.
7. Test by pressing the button you just programmed. The garage door
will activate.
HOW TO USE THE REMOTE CONTROL
Press and hold the button until the door or other programmed device starts
to move. The remote control will operate from 1 to 3 car lengths away on
typical installations. Installations and conditions vary.
ERASE REMOTE CONTROL PROGRAMMING FROM THE
OPENER
The following steps will erase ALL remote controls and any keyless entries
from your opener.
1. Press and hold the LEARN button on the garage door opener until the
Learn LED turns off (approximately 6 seconds).
2. Test by pressing the button on the remote control to ensure it no
longer activates the opener.
3. Follow programming steps to reprogram the remote control.
REPLACE THE REMOTE CONTROL BATTERY
Multi-Function Door Control Motion Sensing Door Control
To prevent possible SERIOUS INJURY or DEATH:
⢠NEVER allow small children near batteries.
⢠If battery is swallowed, immediately notify doctor
To reduce risk of fire, explosion or chemical burn:
⢠Replace ONLY with 3V CR2032 corn batteries.
⢠DO NOT recharge, disassemble, heat above 212°F (100°C)
orîincinerate.
2
3
1
3V CR2032
For more information and support, go to:
support.chamberlaingroup.com
5
TO REMOTE
6 7
Product specificaties
| Merk: | Chamberlain |
| Categorie: | Garagepoortopener |
| Model: | 950EV |
Heb je hulp nodig?
Als je hulp nodig hebt met Chamberlain 950EV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Garagepoortopener Chamberlain
17 Augustus 2023
28 Mei 2023
11 Mei 2023
8 Mei 2023
1 Mei 2023
28 April 2023
28 April 2023
25 April 2023
24 April 2023
23 April 2023
Handleiding Garagepoortopener
- Garagepoortopener Abon
- Garagepoortopener Aperto
- Garagepoortopener Berner
- Garagepoortopener Budgetgaragedeuren
- Garagepoortopener Dickert
- Garagepoortopener DITEC
- Garagepoortopener Doco
- Garagepoortopener Doorsystems
- Garagepoortopener Einhell
- Garagepoortopener Entrematic
- Garagepoortopener FAAC
- Garagepoortopener Geba Tronic
- Garagepoortopener Goris
- Garagepoortopener Homentry
- Garagepoortopener Hormann
- Garagepoortopener Liftmaster
- Garagepoortopener MAC
- Garagepoortopener Marantec
- Garagepoortopener Novoferm
- Garagepoortopener Novotecnica
- Garagepoortopener Profitech
- Garagepoortopener Rademacher
- Garagepoortopener Seculux
- Garagepoortopener Silver
- Garagepoortopener Skylink
- Garagepoortopener Somfy
- Garagepoortopener Sommer
- Garagepoortopener Superrollo
- Garagepoortopener Tormatic
- Garagepoortopener Craftsman
- Garagepoortopener Maveo
Nieuwste handleidingen voor Garagepoortopener
1 December 2023
2 Oktober 2023
2 Oktober 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023