Chacon 34564 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Chacon 34564 (28 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 76 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Wi- Fi Camera
34564
QUICK START GUIDE / GUIDE DE DÉMARRAGE RAPIDE / BEKNOPTE
HANDLEIDING / GUÍA DE INSTALACIÓN RÁPIDA / GUIA DE INICIAÇÃO
RÁPIDA / KURZANLEITUNG / GUIDA RAPIDA ALL'USO / КРАТКОЕ
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ / SKRÓCONA INSTRUKCJA OBS UGI Ł/
HIZLI BAŞLANGKILAVUZU / GHID DE INSTALARE
EN
KIT CONTENT
FRIENDLY REMINDER
- For video recording, BE SURE TO use CLASS 10 memory card or above (not included). Other kinds of memory card may cause
unexpected results and should be avoided.
- Anytime when you find the camera pan/tile function does not perform properly, calibrate the camera to get correct principle position
(refer to step 8 of setup the camera section).
- For better performance, please enable the video hardware acceleration function. This function only for
Android (refer to the app introduction section).
PRODUCT OVERVIEW
SETUP THE CAMERA
1. APP Download
Download and install the "OMGuard HD" APP to your device.
Note: Press and hold the “Reset” button for 5 seconds,
the system will be restored into factory default.
2. Power up The Camera
Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes.
steady on. This process would be finished within 1 min and make sure the LED is Hashing in RED.
3a. Wireless Connection
(1) In the Wi- - fiFi setting of your smart device. Choose the Wi Fi router with pre x of HD xxxxxx-
(xxxxxx=Camera ID numbers). Then enter the default password 12345678.
(2) Launch the APP, tap to add the camera.
(3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID
information. Or tap "Search" to locate the camera.
(4) Enter the default password 123456.
(5) Tap “Save” when you done.
(6) Later, APP will request user to modify the default password to private password.
3b. Wired Connection
(1) Make sure your smartphone is connected your Wi-Fi router.
(2) Connect the camera’s Ethernet cable to the Rj45 connect, and power on the camera with adapter.
(3) Launch the APP, tap the “Search” to locate the camera.
(4) Enter the default password 12345678 and save the settings.
(5) Later, APP will request user to modify default password to private password.
4. Wi-Fi Setting
(1) Tap then the advanced setting icon will appear on the screen.
(2) Enter the default password :12345678
(3) Select your Wi-Fi router, and enter its password.
(4) The Camera will offline for around 40 seconds to reboot for Wi connection. When camera connects
to Wi-Fi router correctly, the RED LED will stay ON.
(5) In the Wi- -Fi setting on your smart device again, make sure the Wi Fi router you are connecting to is the same as the camera. If not,
manually assign to it.
APP INTRODUCTION
Follow the steps below for Event Playback:
(1) Tap the icon to access the event list section.
(2) Select the time interval for the event list.
(3) Select the le you want to playback.
(4) If you want to store the les to the mobile device, tap to download the les (Best while under
Wi- Fi environment due to larger high data size)definition
Enable video hardware acceleration (For Andriod)
(1) In the camera list, tap the
(2) Click the click box to enable video hardware acceleration
Note: In soft AP mode, the RED LED long Hashes once followed by 2 short Hashes. In normal mode, the LED is Hashing in RED.
Note: If you fail to add the camera for several times, press and hold the “Reset” button for 5 seconds to reset it.
CAMERA INSTALLATION
(1) Drill the mounting holes by using the alignment paper.
(2) Insert 4 screw anchors into the wall.
(3) Insert 2 screws into the screw anchors, reserved space 8 to 10 mm. Then Hang the camera on 2 screws.
(4) Fasten 4 screws by using hex key
OTHERS
Specifications
Hotline
www.chacon.be
Symbols
Hereby, Chacon, declares that the » radio equipment type « 34564 is in compliance with the Directive 2014/53/UE.
The full text of the EU declaration of conformity is available at the following Internet address:
http://chacon.be/conformity
Chacon S.A.
Avenue Mercator 2 • 1300 Wavre
Belgium
General
Transmission frequency
WiFi 802.11 b/g/n
Max power consumption (EIRP)
<100mW
Caméra
Resolution
1080P
View angle
90°
Enclosure protection
IP66
Night vision
12m
Supply voltage
Adaptor (5VDC)
Note: Before mounting the camera, install the memeory card if you prefer recording to local storage


Product specificaties

Merk: Chacon
Categorie: Bewakingscamera
Model: 34564

Heb je hulp nodig?

Als je hulp nodig hebt met Chacon 34564 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Chacon

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera