CESYS C028149 Handleiding
CESYS
Meetapparatuur
C028149
Bekijk gratis de handleiding van CESYS C028149 (2 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 53 mensen en kreeg gemiddeld 4.9 sterren uit 27 reviews. Heb je een vraag over CESYS C028149 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
2011!U S E R ‘ S I N S T R U C T I O N S!ART.-NR. C028149
The CESYS USB-ISOLATOR
breaks the electrical connection
between host PC and USB
device. Thus, cross currents
and mutual influences will be
inhibited.
For audio applications, this
process is called "ground lift";
in measuring and control
technology it is called "galvanic
isolation". The most frequent
cause of noise interferences
and inaccurate measurements
will be eliminated in this way.
Crystal clear sound.
Ground loops caused by USB
connections in recording
studios or at stage applications
will be prevented effectively.
An additional delay (latency
period) will not occur.
Precise measurement
results.
Without disturbing
interferences, more precise
results can be achieved in the
measurement technology.
Moreover, measurements will
become possible where the
signal to be measured has no
reference the to PC ground.
Safety and protection.
When controlling illumination
arrangements (e.g.
discotheque, stage), electrical
equipment or machines via
USB, the galvanic isolation will
provide protection against
damages on the host computer.
Clear sound and precise measurement
1. SET-UP MODE OF OPERATION
2. CONNECT USB DEVICE
3. CONNECT PC
U S B - I S O L ATO R
USB GALVANICALLY ISOLATED
Technical data
USB OPERATING MODES
FULL SPEED (12 MBIT/S)
LOW SPEED (1,5 MBIT/S)
ISOLATION
1 KV DC
OPERATING
TEMPERATURE
-40°C TO +70°C
DIMENSIONS
APPROX. 57 X 45 X 28 MM
FEATURES
USB 2.0 COMPATIBLE
NO DRIVERS REQUIRED
POWER-ON LED
ORDERING
INFORMATION
C028149 USB-ISOLATOR
Cesys Gesellschaft für angewandte Mikroelektronik mbH Zeppelinstrasse 6A D-91074 Herzogenaurach sales@cesys.com■ ■ ■
The CESYS USB-ISOLATOR
delivers almost the same
features as a USB cable.
Thus, no drivers have to be
installed and all operating
systems are supported (MAC,
Windows, Linux, embedded OS
and others).
The maximum permissible
cable length for USB
connections applies as well to
the USB-ISOLATOR.
The total length between PC
and device is relevant in that
case.
The galvanic isolation of the
supply voltage for the
connected USB device will
increase the power
consumption slightly compared
with direct connection without
USB-ISOLATOR.
In extreme cases (power
demanding USB device on
weak PC) additional use of a
USB-HUB with own power
adaptor (not supplied) may be
required between USB-
ISOLATOR and USB device or
host PC.
Prior to switching the mode of
operation (full speed/low
speed) all connections must be
completed. High-speed mode of
operation is not supported.
Release for medical equipment
is NOT available.
Information about delivery and
further details can be obtained
on the web site of the
manufacturer:
www.cesys.com
Product specificaties
| Merk: | CESYS |
| Categorie: | Meetapparatuur |
| Model: | C028149 |
Heb je hulp nodig?
Als je hulp nodig hebt met CESYS C028149 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur CESYS
29 Juni 2023
27 Juni 2023
Handleiding Meetapparatuur
- H-Tronic
- Perel
- Bresser
- Monacor
- ORNO
- BAXTER
- Eurolite
- Bosch
- Pyle
- Rothenberger
- Shimano
- Steinberg
- Bohle
- NetPeppers
- GQ
Nieuwste handleidingen voor Meetapparatuur
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025