Cerwin-Vega CVI-122M Handleiding

Cerwin-Vega Speaker CVI-122M

Lees hieronder de 📖 handleiding in het Nederlandse voor Cerwin-Vega CVI-122M (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
OPERATION MANUAL
CVi-Series
1
BEFORE YOU BEGIN
Cerwin-Vega! CVi-SerieS
The Cerwin-Vega! speakers covered by this manual are designed for portable applications in which the speakers will be
stacked directly on the floor, stage, a solid, stable platform, mounted on a tripod stand or pole-mount. Cerwin-Vega!
Professional does not support suspension of the models covered by this manual nor are these models intended for fixed
installation in outdoor or high moisture environments. Moisture can damage the speaker cone and surround and cause
corrosion of electrical contacts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense
direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure
to intense ultra-violet (UV) light.
THESE SPEAKERS ARE HEAVY!
Cerwin-Vega! Professional speakers can generate considerable energy. When placed on a slippery surface such as polished
wood or linoleum, the speaker may move due to vibration caused by its acoustical energy output. Precautions should be taken
to assure that the speaker does not fall off a stage or table on which it is placed.
To avoid damage to your speaker and other parts of your system, when you turn on your system, ALWAYS turn on the power
amp last! This will avoid loud, damaging pops that will annoy your audience, and blow your speakers. When you power down,
the amplifier should ALWAYS be turned off first to avoid the same problems.
When using two or more speaker systems, be sure to match the polarity (+/-) of the speaker system connectors to those of the
amplifier. If polarities do not match, the sounds produced by the speaker will interfere with each other, making it impossible to
achieve a well-balanced sound field.
Some Cerwin-Vega! speaker models include a receptacle cup to allow mounting on tripod stands or poles. When using stands,
be sure to observe the following precautions:
• Check the stand specification to be certain it is designed to support the weight of the speaker.
• Observe all safety precautions specified by the stand manufacturer.
• Always verify that the stand is placed on a flat, level, and stable surface and be sure to fully extend the legs of tripod type
stands. Position the stand so that the legs do not present a trip hazard.
• Route cables so that performers, production crew, and audience will not trip over them pulling the speaker over.
• Do not attempt to place more than one speaker on a stand designed for a single speaker.
• Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e. sandbags) on the base
of the stand to improve stability.
• Unless you are confident that you can handle the weight of the speaker, ask another person to help you get it onto the tripod
stand or pole.
Cerwin-Vega! loudspeakers are easily capable of generating sound pressure levels (SPL) sufficient to cause permanent
hearing damage to performers, production crew and audience members. Caution should be taken to avoid prolonged exposure
to SPL in excess of 90 dB.
2
Los altavoces Cerwin-Vega! incluidos en este manual están diseñados para las aplicaciones portátiles en las cuales los
altavoces se apilarán directamente sobre el piso, escenario, o sobre una plataforma sólida y estable, o se montarán sobre un
trípode o columna.
Cerwin-Vega! Professional no recomienda la suspensión de los MODEL'S incluidos en este manual, y estos MODEL'S no están
diseñados para la instalación fija en ambientes exteriores o donde exista un alto nivel de humedad. La humedad puede dañar
el cono del altavoz y el sonido circundante, pudiendo también causar la corrosión de los contactos eléctricos. Evite exponer
los altavoces a la humedad directa. Mantenga los altavoces fuera de la luz solar directa por períodos prologados o a la luz
solar de gran intensidad. La suspensión del excitador se resecará prematuramente y las superficies acabadas pueden
degradarse debido a la exposición a largo plazo a la luz ultravioleta (UV) intensa.
Los altavoces Cerwin-Vega! Professional pueden generar un nivel considerable de energía. Cuando se coloca sobre una
superficie resbalosa, por ejemplo un piso de madera pulida o de linóleo, el altavoz puede moverse debido a la energía
acústica que genera. Se deben tomar precauciones para asegurar que el altavoz no se caiga del escenario o de la mesa en la
cual ha sido colocado.
Para evitar dañar su altavoz y otras partes de su sistema, cuando encienda su sistema, SIEMPRE encienda último el
amplificador de potencia. Esto evitará ruidos fuertes y dañinos que molestarán a su audiencia y dañarán sus altavoces.
Cuando apague el sistema, SIEMPRE deberá apagar primero el amplificador, a fin de evitar los mismos problemas.
Cuando utilice dos o más sistemas de altavoces, tenga cuidado de que cada polaridad (+/-) del conector del sistema de
altavoces coincida con la del amplificador. Si las polaridades no coinciden, los sonidos generados por el altavoz se interferirán
mutuamente, con lo cual será imposible conseguir un campo de sonido bien equilibrado.
Algunos MODEL'S de altavoces Cerwin-Vega! incluyen un receptáculo que permite montarlos en plataformas sobre trípodes
o columnas. Cuando utilice plataformas, tome siempre las siguientes precauciones:
• Consulte las especificaciones de la plataforma para comprobar que esté diseñada para soportar el peso del altavoz.
• Cumpla con todas las precauciones de seguridad especificadas por el fabricante de la plataforma.
• Verifique siempre que la plataforma esté colocada sobre una superficie plana, nivelada y estable, y extienda totalmente las
patas de las plataformas con trípode. Ubique la plataforma en un sitio donde las patas no hagan tropezar a las personas.
• Encamine los cables de modo tal que los músicos, el equipo de producción y el público no se tropiecen con los cables y
arrastren el altavoz.
• No coloque más de un altavoz en una plataforma diseñada para sostener un sólo altavoz.
• Sea cuidadoso cuando haya viento en lugares al aire libre. Puede ser necesario colocar pesos adicionales (por ejemplo,
bolsas de arena) en la base de la plataforma para mejorar su estabilidad.
• A menos que confíe en que puede sostener el peso del altavoz, pida ayuda a otra persona para subirlo a la plataforma de
trípode o columna.
Cerwin-Vega! puede generar fácilmente niveles de presión de sonido (SPL) suficientes para causar daños permanentes al oído
de los músicos, el equipo de producción y el público. Se deben tomar precauciones para evitar la exposición prolongada a
niveles de SPL superiores a 90 dB.
ANTES DE EMPEZAR
Cerwin-Vega! CVi-SerieS


Product specificaties

Merk: Cerwin-Vega
Categorie: Speaker
Model: CVI-122M

Heb je hulp nodig?

Als je hulp nodig hebt met Cerwin-Vega CVI-122M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Cerwin-Vega

Handleiding Speaker

Nieuwste handleidingen voor Speaker