Celestron Neximage 10 Solar System Color Imager Handleiding

Celestron Fotocamera Neximage 10 Solar System Color Imager

Lees hieronder de 📖 handleiding in het Nederlandse voor Celestron Neximage 10 Solar System Color Imager (12 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

NexImage

USER’S MANUAL

Model #93708, #93711

#95518, #95519

ENGLISH

2 | ENGLISH

Congratulations on your purchase of the Celestron NexImage

Solar System imaging camera.

Your NexImage camera comes with the following:

+ NexImage Camera

+ 1.25” nose piece

+ CD including NexImage iCap and RegiStax processing software

+ USB Cable

Recommended Minimum System requirements:

+ Pentium IV, 2.0 GHz, 1GB RAM

+ Graphics card with 24 or 32 bit

+ Windows XP, Windows Vista, Windows 7 (32 & 64 bit)

+ DirectX 9.0c or higher

1.25”

Nose Piece

USB CableNexImage Camera NexImage iCap and

Registax processing

software

Fig 1

ENGLISH | 3

Quick Start

1. Place the CD into your computer’s

CD-ROM drive.

2. Install both the NexImage iCap and

RegiStax software onto your computer.

3. Thread the 1.25” nose piece into the body

of the NexImage camera. See Fig 2.

4. Slide the 1.25” nose piece of the camera

into the eyepiece barrel of your telescope.

See Fig 3.

5. Plug the small end of the USB cable into

the port on the back of the camera.

6. Plug the other end of the USB cable

into a USB port on your computer.

Once connected, the Found New

Hardware message will appear. Follow

the Installation Wizard until the device

has been successfully installed.

Fig 2

Fig 3

Product specificaties

Merk:	Celestron
Categorie:	Fotocamera
Model:	Neximage 10 Solar System Color Imager
Gewicht:	57 g
Gebruikershandleiding:	Ja
Meegeleverde kabels:	USB
Maximale beeldsnelheid:	200 fps
Type beeldsensor:	ON Semi MT9J003 Color CMOS
Ondersteunt Windows:	Windows 10,Windows 7,Windows 8
Stroomvoorziening via USB:	Ja
Compatibiliteit:	iCap, IC Capture, DirectShow, oaCapture
Cameraresolutie:	3856 x 2764 Pixels
USB kabel lengte:	3 m
Bedrijfstemperatuur (T-T):	-40 - 40 °C
Grootte van de beeldsensor ( B x H ):	6.4 x 4.6 mm
Back-focusafstand met neusstuk:	13.1 mm
A/D-conversie:	12 Bit
Belichtingsbereik:	0.0001 - 10 s
Connectie draad:	1 1/4 "