Casio IDR-200 Handleiding

Casio Horloge IDR-200

Bekijk gratis de handleiding van Casio IDR-200 (6 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 3.8 sterren uit 4 reviews. Heb je een vraag over Casio IDR-200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
Operation Guide IDR-200
1
MA0406-EA
o
C
/
o
F
SET
RESET
WAVE
RE-SYNC
o
C
/
o
F
SET
SELECT
RESET
WAVE
RE-SYNC
1cm
ILLUSTRATION
Main unit
Operation Guide IDR-200
2
RESET
SELECT
TEST
° °C/ F
RESET
SELECT
TEST
° °C/ F
RESET
SELECT
TEST
° °C/ F
RESET
SELECT
TEST
° °C/ F
A
8
9
0
¡
A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the
clock.
Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Current time
(Hour, minutes, seconds)
DST indicato
r
Day of week
PM indicator
Wave OK indicator
Antenna Icon
Current Humidit
y
Upcomimg weather
indicator
DATE (month - date)
Current Temperature
In locations subject to radio frequency interference, the product may malfunction and require you to reset the
product.
GENERAL GUIDE
Main unit
1Time Setting buttons
Use these buttons to set the current time.
2SET button
Use this button to cycle through setting screens.
3WAVE button
Press this button to trigger a time calibration signal receive operation.
4RESET button
Press this button to reset the clock after replacing its batteries.
5° °C/ F button
Press this button to toggle the temperature unit between Celsius and Fahrenheit.
6RE-SYNC button
Press this button to re-synchronize the timing of the main unit and the sub-unit.
7SELECT button
Press this button to toggle the display between main unit (INDOOR) and sub-unit (OUTDOOR) data.
Sub-unit
8SELECT button
Press this button to toggle the display between the current temperature and humidity.
9RESET button
Press this button to reset the sub-unit after replacing its batteries.
0TEST button
This button is for testing the unit. Normally, you should not press it. If you do, be sure to press the
RESET button ( ) next.9
A° °C/ F button
Press this button to toggle the temperature unit between Celsius and Fahrenheit.
Sub-unit
Operation Guide IDR-200
3
TIME CALIBRATION SIGNAL RECEPTION PRECAUTIONS
This clock is able to receive the time calibration signal transmitted from
Mainflingen, Germany (located 25kilometers southeast of Frankfurt).
Signal reception is possible within approximately 1,200 km of the
transmitter.
Even when the clock is within the reception range, signal reception may
be impossible if the signal is blocked by mountains or other geological
formations between the clock and signal source.
Signal reception is affected by weather, atmospheric conditions, and
seasonal changes.
The time calibration signal bounces off the ionosphere. Because of this,
such factors as changes in the reflectivity of the ionosphere, as well as
movement of the ionosphere to higher altitudes due to seasonal
atmospheric changes or the time of day may change the reception
range of the signal and make reception temporarily impossible.
Reception is best when the back of the clock is facing toward
Mainflingen. Note, however, that moving the clock while the time
calibration signal receive operation is taking place will make stable
reception impossible.
Think of the clock as acting like a TV or radio when it is receiving the calibration signal.When receiving indoors,
move to a location as near as possible to a window. Proper signal reception can be difficult or even impossible
under the conditions listed below.
Inside or among
buildings, or near
neon signs
Inside a vehicle Near refrigerators
or other household
appliances, near
office equipment,
mobile phones or
wireless LAN
devices
Near a
construction site,
airport, or other
sources of
electrical noise,
underground or in
tunnels, near
railroads,
highways, or radio
stations with
interfering
frequencies
Near high-tension
power lines
Among or behind
mountains
Signal reception is normally better at night than during the day.
Radio interference can make signal reception impossible.
Strong electrostatic charge can result in the wrong time being set.
Mainflingen
1200 km
USING THE CLOCK
Any of the following procedures can be used to set current date and time.
Auto receive of the time calibration signal
Manual receive of the time calibration signal
Manual setting without using the time calibration signal
Auto Receive
The clock receives the time calibration signal eight times each day (2:00, 5:00, 8:00, 11:00, 14:00, 17:00, 20:00,
23:00).
A signal receive operation takes from two to ten minutes under good signal conditions.
Antenna Icon
If you see this: It means this
Icon is flashing. Signal reception is in progress.
Icon is not displayed. The last receive operation failed.
Icon is displayed (not flashing). The last receive operation was successful.
Wave OK Indicator
If you see this: It means this
OK is not displayed. All receive operations over the past 24 hours failed, or signal
reception is in progress.
OK is displayed. At least one of the receive operations over the past 24 hours was
successful.
Unsuccessful Signal Reception
The antenna icon disappears from the display when a signal receive operation is unsuccessful. If this happens,
try changing the position or orientation of the clock, and press the WAVE button (3) to receive again.
Manual Receive
Press the WAVE button ( ) to trigger a calibration signal receive operation.3
Use the WAVE button (3) to trigger a receive operation after replacing the clock’s batteries or if the auto receive
operation was not performed correctly for some reason.
Important!
Do not perform any button or switch operation while a signal receive operation is in progress.
The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data.
The DST indicator appears on the display when Daylight Saving Time (summer time) data is received.


Product specificaties

Merk: Casio
Categorie: Horloge
Model: IDR-200

Heb je hulp nodig?

Als je hulp nodig hebt met Casio IDR-200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden