Casio ID-16S Handleiding
Bekijk gratis de handleiding van Casio ID-16S (2 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.5 sterren uit 4.5 reviews. Heb je een vraag over Casio ID-16S of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Operation Guide ID-16S
1
MA1205-EA
ILLUSTRATION
©
2012 CASIO COMPUTER CO., LTD.
1cm
•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes, seconds)
Day of the week
Current temperature
Current humidity
Date (month - day)
PM indicator
GENERAL GUIDE
11
11
1°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
22
22
2SET button
Use this button when setting the current time.
33
33
3+ / – buttons
Use these buttons to change the setting that is flashing on the display.
44
44
4RESET button
Press this button to reset the clock after replacing its batteries.
USING THE CLOCK
1. Press the SET button ( ) to cycle through the setting screens as shown below.2
12-hour/24-hour
Setting Screen
Time Setting ScreenMonth and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen Contrast Setting Screen
2. While the screen you want is displayed, use the + – and buttons (3) to change the flashing digits.
• Holding down + or – changes the flashing
digits at high speed.
• You can set the year in the range of 2000 to
2099. The day of the week is set automatically
in accordance with the date setting.
• Pressing + – or while the Time Setting Screen
is on the display causes the seconds count to
be reset to 00.
• Each press of + – or while the 12-hour/24-hour
Setting Screen is on the display toggles
between 12-hour and 24-hour timekeeping.
• You can set the contrast level in the range of
1 to 10.
3. After making the settings you want, use the SET button (2) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
Press
–
to
decrease
the flashing
digits.
Press
+
to
increase
the flashing
digits.
Operation Guide ID-16S
2
THERMOMETER FUNCTIONS
•A built-in sensor measures temperature and shows the measured value on the display.
• ° °The temperature display shows “LO” for temperatures below –19.9 C (–3.8 F) and “HI” for temperatures above
49.9 F).°C (121.8°
• ° ° ° °Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
•Push the °C/°F button (1) to select either Celsius (° °C) or Fahrenheit ( F).
° °C/ F button ( )1
Celsius ( C) Fahrenheit ( F)° °
°C°F
HYGROMETER FUNCTIONS
A built-in sensor measures humidity and shows the measured value on the display.
•The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.
• ° °Whenever the current temperature is outside the range of 0 C to 49.9 C, the humidity display will show “– –”.
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+ –) and negative ( ) ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Press the RESET RESET button (4). Be sure to press the button (4) after replacing batteries.
5. Replace the battery compartment cover.
Battery precautions
•Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
•Be sure to load the batteries with their positive (+ –) and negative ( ) ends facing correctly.
•Never mix old and new batteries, or batteries of different brands.
•Never charge the batteries that come with the clock.
•Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
•Replace the batteries at least once a year, even if the current batteries are working properly.
•The batteries that come with the clock lose some of their power during transport and storage.
SPECIFICATIONS
Accuracy at Normal Temperature: ±60 seconds a month
Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099
Thermometer Functions: Measuring range: –19.9 C to 49.9 C (–3.8 F to 121.8° ° ° °F)
Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such° ° ° °
readings are actually outside the guaranteed temperature range of this clock.
Celsius ( C)/Fahrenheit ( F) switching° °
Temperature Sensor Precision: ± °2 C ( F) in range of 0 C to 40 C (32 F to 104± °4° ° ° °F)
Hygrometer Function: Measuring range: 10% to 90%, when temperature is 0 C to 40 C (32 F to 104° ° ° °F)
Humidity Sensor Precision: ±10%, when temperature is 5 C to 40 F to 104° °C (41° °F)
Other: 12/24-hour timekeeping
Battery: Two AA size batteries (Type: R6P)
Battery Life: Approximately 1 year
Operating Temperature: 0 F)°C to 40°C (32°F to 104°
Product specificaties
| Merk: | Casio |
| Categorie: | Horloge |
| Model: | ID-16S |
Heb je hulp nodig?
Als je hulp nodig hebt met Casio ID-16S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Horloge Casio
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Horloge
- Tommy Hilfiger
- Irox
- Fila
- TW Steel
- Haffstreuner
- Bruno Sohnle
- Leff
- Westfalia
- ETA
- Habitat
- Radley London
- Lucien Picard
- ETT
- TCL
- Suunto
Nieuwste handleidingen voor Horloge
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025