Casio Edifice EFV-130D-7AVUEF Handleiding

Bekijk gratis de handleiding van Casio Edifice EFV-130D-7AVUEF (1 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 16 mensen. Heb je een vraag over Casio Edifice EFV-130D-7AVUEF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

/ 1 PDF

1

Operation Guide ANALOG(MAI)

MA1211-EA

Your watch may differ somewhat from the one shown in the illustration.•

Notes

Some water resistant models are equipped with a screw lock •

crown.

With such models, you must unscrew the crown in the direction •

noted in the illustration to loosen it before you can pull it out. Do

not pull too forcibly on such crowns.

Also note that such watches are not water resistant while their •

crowns are loosened. Be sure to screw the crowns back in as

far as they will go after making any setting.

[

Module 5284

]

To set the time

Crown

When the second hand is at 12 o’clock, pull out the 1.

crown to stop it.

Set the hands by rotating the crown. Move the 2.

minute hand four or fi ve minutes past the setting

you want, and then back them up to the setting.

Push the crown back in on a time signal to resume 3.

timekeeping.

[

Modules 5128, 5180,

5199, 5206,

5207, 5218, 5250, 5340, 5341, 5342, and 5343]

To set the time

First click (Day setting)

Second click

(Time setting)

Crown

(Normal position)

When the second hand is at 12 o’clock, pull out the 1.

crown to the second click to stop it.

Set the hands by rotating the crown. Move the 2.

minute hand four or fi ve minutes past the setting

you want, and then back them up to the setting.

Push the crown back in on a time signal to resume 3.

timekeeping.

To set the day

Avoid setting the day between 9:00 p.m. and 1:00 •

a.m. The day may not change in the following day if

you do.

Pull out the crown to the fi rst click.1.

Set the day by rotating the crown.2.

Push the crown back in to its normal position.3.

[Modules 5125, 5167, 5223, 5237, 5249, and 5339]

To set the time

Crown

(Normal position)

First click

(Day, day of week setting)

Second click

(Time setting)

When the second hand is at 12 o’clock, pull out the 1.

crown to the second click to stop it.

Set the hands by rotating the crown. Move the 2.

minute hand four or fi ve minutes past the setting

you want, and then back them up to the setting.

Push the crown back in on a time signal to resume 3.

timekeeping.

To set the day and day of the week

Avoid setting the day and day of the week between •

9:00 p.m. and 5:00 a.m. The day and day of the

week may not change in the following day if you do.

Pull out the crown to the fi rst click.1.

Set the day by rotating the crown counterclockwise.2.

Set the day of the week by rotating the crown clockwise.3.

Push the crown back in to its normal position.4.

For watch with the elapsed time bezel •

Rotate the elapsed time bezel to align the mark with the

minute hand.

After certain amount of time elapsed, read the graduation on the

elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

Elapsed time bezel

Specifi cations

Module No.

Accuracy at normal

temperature

(per month)Battery typeBattery life

5125/5128/5206/

5207/5237/5249 ±20 secondsSR626SWApprox. 3 years

5167±20 secondsSR920SWApprox. 5 years

5180/5199/5223/

5342/5343 ±20 secondsSR621SWApprox. 3 years

5218/5250±20 secondsSR616SWApprox. 2 years

5284±20 secondsSR521SWApprox. 2 years

5339/5340/5341±20 secondsSR920SWApprox. 3 years

Product specificaties