Casio Edifice EF-129D-2A Handleiding

Bekijk gratis de handleiding van Casio Edifice EF-129D-2A (1 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 76 mensen. Heb je een vraag over Casio Edifice EF-129D-2A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

/ 1 PDF

1

Operation Guide 5359/5448

MA1904-EA

© 2019 CASIO COMPUTER CO., LTD.

xYour watch may differ somewhat from the one shown in the illustration.

Click 1

Crown

Click 2

Day

Crown Operations

Crown

Loosen

Some water-resistant models (100meters, 200meters)

have a screw-in crown. When you need to perform a crown

operation, rotate it towards you to unscrew it. Then pull the

crown out. Avoid applying undue force when pulling. The watch

loses its water resistance while the crown is unscrewed. After

performing a crown operation, fully screw the crown back in.

If your watch has a rotary bezel...

Start

Elapsed time

Current

You can rotate the bezel to align its

▼

mark with the

minute hand. Then you will be able to tell how much

time has elapsed since aligning the

▼

mark.

Specifications

Accuracy: ±20seconds average per month

Battery:Module 5359: One silver oxide battery (Type: SR916SW)

Module 5448: One silver oxide battery (Type: SR920SW)

Battery Life: Approximately 3years

[Module 5359]

Low Battery Indicator:Second hand moves in 2-second increments when power is low.

Specifications are subject to change without notice.

To adjust the time setting

When the second hand is at 12o’clock, pull

the

Crown out to Click 2.

Rotate the to change the time setting. Crown

Note

xTake care that you set the

correct AM or PM time.

xWhen changing the time,

move the minute hand four

or five minutes past your

final setting, and then back

it up to the setting you want.

To change the day setting

Note

xThe day setting uses a

31-day month. Make

adjustments for months of

shorter lengths.

xAvoid changing the day

setting between the hours

of 9 p.m. and 1 a.m.

Otherwise, the day setting

may not change correctly at

midnight.

Pull the out to Click 1. Crown

Rotate the Crown to set the day.

Push the back in. Crown

Push the back in on a time signal to Crown

resume timekeeping.

Product specificaties