Casio Edifice Classic Handleiding

Casio Horloge Edifice Classic

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Edifice Classic (7 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-15) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-17).

The watch is now ready for use.

E-4

Contents

About This Manual …………………………………………………………………………………………… E-2

Things to check before using the watch ………………………………………………………………… E-3

Mode Reference Guide ……………………………………………………………………………………… E-7

Timekeeping ………………………………………………………………………………………………… E-13

Conﬁ guring Home City Settings ………………………………………………………………………… E-15

To conﬁ gure Home City settings …………………………………………………………………… E-15

To change the daylight saving time (summer time) setting……………………………………… E-16

Conﬁ guring Current Time and Date Settings ………………………………………………………… E-17

To change the current time and date settings …………………………………………………… E-17

Hand Home Position Adjustment ……………………………………………………………………… E-20

To adjust home positions …………………………………………………………………………… E-20

Taking Temperature Readings …………………………………………………………………………… E-22

To take temperature readings ……………………………………………………………………… E-22

To calibrate the temperature sensor ……………………………………………………………… E-24

Specifying Temperature Unit …………………………………………………………………………… E-25

To specify the temperature unit …………………………………………………………………… E-25

E-5

Checking the Current Time in a Different Time Zone ………………………………………………… E-26

To enter the World Time Mode …………………………………………………………………… E-26

To conﬁ gure World Time City and summer time settings ……………………………………… E-27

To swap your Home Time and World Time Cities ……………………………………………… E-28

Using the Stopwatch ……………………………………………………………………………………… E-29

To enter the Stopwatch Mode ……………………………………………………………………… E-29

To perform an elapsed time operation …………………………………………………………… E-29

To pause at a split time ……………………………………………………………………………… E-29

To measure two ﬁ nishes …………………………………………………………………………… E-30

Using the Countdown Timer ……………………………………………………………………………… E-31

To enter the Countdown Timer Mode ……………………………………………………………… E-31

To specify the countdown start time ……………………………………………………………… E-31

To perform a countdown timer operation ………………………………………………………… E-32

To stop the alarm …………………………………………………………………………………… E-32

Using the Alarm …………………………………………………………………………………………… E-33

To enter the Alarm Mode …………………………………………………………………………… E-33

To set an alarm time ………………………………………………………………………………… E-34

To test the alarm …………………………………………………………………………………… E-34

To turn an alarm and the Hourly Time Signal on and off………………………………………… E-35

To stop the alarm …………………………………………………………………………………… E-35

E-6

Illumination ………………………………………………………………………………………………… E-36

To illuminate the display manually ………………………………………………………………… E-36

To change the illumination duration ……………………………………………………………… E-36

To enable or disable the auto light switch ………………………………………………………… E-38

Button Operation Tone …………………………………………………………………………………… E-40

To enable or disable the button operation tone ………………………………………………… E-40

Low Battery Indication …………………………………………………………………………………… E-41

Troubleshooting …………………………………………………………………………………………… E-42

Speciﬁ cations ……………………………………………………………………………………………… E-45

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time in the Home City

• View the current time in the World Time City Any mode E-13

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-13

Determine the temperature at your current location Thermometer Mode E-22

Conﬁ gure World Time settings World Time Mode E-26

Use the stopwatch to measure elapsed time Stopwatch Mode E-29

Use the countdown timer Countdown Timer Mode E-31

Set an alarm time Alarm Mode E-33

Operation Guide 5446

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

Thermometer Mode

Timekeeping Mode

Mode dial hand

Thermometer Mode

Timekeeping Mode

Mode dial hand

E-9

• The mode dial hand indicates the watch’s current mode.

World Time Mode Stopwatch Mode

Countdown Timer ModeAlarm Mode

World Time Mode Stopwatch Mode

Countdown Timer ModeAlarm Mode

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

C for about two seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Thermometer 1 to 2 minutes

Alarm 2 to 3 minutes

Setting screen (digital setting ﬂ ashing) 2 to 3 minutes

Initial Screens

When you enter the Alarm or World Time Mode, the data you were viewing when you last exited the mode

appear ﬁ rst.

Scrolling

The D and B buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-11

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands out of the way to better

view what is on the display.

• This operation can be performed in any mode. In the case of a setting mode (setting ﬂ ashing on the

screen), the hands will move out of the way automatically, even if you do not perform the below

operation.

1. While holding down B, press C.

• This will cause the hour and minute hands to move to a location where they do not block your view

of the digital display.

Example: When the current time is 8:23

Flashes while the hands

are moved out of the way.

2. Holding down B again as you press C will cause the hands to return to their normal positions (normal

timekeeping).

E-12

Note

• Watch button functions are the same regardless of whether the hands are moved out of the way or at

their normal positions.

• Changing to another mode will cause the hands to move back to their normal positions.

• The hands also will move back to their normal positions automatically if no operation is performed for

about one hour.

E-13

Timekeeping

In addition to viewing the current time (Home Time), day, and day of the week at your location (Home

City), you can also use World Time to view the time at locations around the globe.

Conﬁ guring Home City Settings: page E-15

Conﬁ guring World Time Settings: page E-26

Hour hand

Second hand

World Time

minute hand

World Time

hour hand

Minute hand

Day

Day of week

World Time AM/PM

• Home Time AM/PM can be determined by viewing the

Hour:Minutes, Seconds digital display (shown below).

Date Screen

E-14

Navigating between Display Screens

Each press of A toggles cycles the display screens as shown below.

Day of week, Day Month Day, Seconds Hour : Minutes, Seconds

PM indicator

(Displayed when

12-hour timekeeping

is selected.)

E-15

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down

A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), city code will be

ﬂ ashing in the upper display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use D (East) and B (West) to scroll through the available city codes.

• Keep scrolling until the city code you want to select as your Home

City is shown in the upper display.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press

• This will cause the DST indicator to appear in the upper display

and the DST setting of the currently selected Home City to appear

in the upper display.

Press

to toggle the DST setting between daylight saving time (ON)

and standard time (OFF).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code

DST indicator

City code

DST indicator

Operation Guide 5446

E-16

5. After all of the settings are the way you want, press A to exit the setting screen.

• The indicator will be on the upper display while daylight saving time is turned on.DST

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), city code will be

ﬂ ashing in the upper display.

2. Press C.

• This will cause the DST indicator to appear in the upper display

and the DST setting of the currently selected Home City to appear

in the upper display.

3. Press D to toggle the DST setting between daylight saving time (

ON) and standard time (OFF).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The indicator will be on the upper display while daylight saving time is turned on.DST

E-17

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the

analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-20).

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), city code will be ﬂ ashing

in the upper display.

City codeCity code

E-18

2. Press C to move the ﬂ ashing in the sequence shown below to select the other settings.

City Code DST

Illumination

Duration

Button Operation

Tone On/Off Day Month

12/24-Hour

Format Seconds Hour

Year

Minutes

• The following steps explain how to conﬁ gure timekeeping settings only.

3. When the timekeeping setting you want to change is ﬂ ashing, use D and/or B to change it as

described below.

Screen To do this: Do this:

Change the city code Use

D (East) and B (West).

Toggle between daylight saving time (

ON) and

standard time (

OFF). Press D.

Toggle between 12-hour (

12H) and 24-hour (24H)

timekeeping. Press D.

Reset the seconds to

(If the current seconds count is between 30 and 59,

one is added to the minute count).

Press D.

Change the hour or minutes

Use D (+) and B (–).

Change the year, month, or day

E-19

4. After all of the settings are the way you want, press A to exit the setting screen.

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see “Conﬁ guring

Home City Settings” (page E-15).

• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from

noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,

time is displayed from 0:00 to 23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the date, there should be no reason to change it except after you have the

watch’s battery replaced.

• The day of the week changes automatically as the date and/or year changes. Make sure that your

date and year settings are correct.

• Refer to the pages shown below for more information on Timekeeping Mode settings.

- Button operation tone on/off: “To enable or disable the button operation tone” (page E-40)

- Illumination duration setting: “To change the illumination duration” (page E-36)

E-20

Hand Home Position Adjustment

Strong magnetism or impact can cause the hands of the watch to be off.

• Home position adjustment is not necessary when the analog time and digital time are the same time in

the Timekeeping Mode.

To adjust home positions

1. In the Timekeeping Mode, hold down A and keep it depressed for

about ﬁ ve seconds until

H.SET appears on the upper display.

• When you release A after H.SET appears, the second hand will

move to 12 o’clock. This indicates the second hand home position

adjustment mode.

• Though ADJ will appear in the upper display about two seconds

after you hold down A, do not release the button yet. Keep it

depressed until H.SET appears.

• Home position adjustment is performed in the following sequence:

second hand, current time hour and minute hand, World Time hour

and minute hand, mode hand.

E-21

2. Use C to select the hand (s) you want to adjust.

• The selected hand (s) will move to 12 o’clock, and the upper display and lower display will show

the information below.

Upper display Lower display Selected hand

H.SET Flashing 00 Second hand

Flashing 0:00 Not displayed Hour and minute hands

Flashing SUB Flashing 1World Time hour and minute hands

Flashing SUB Flashing 2Mode dial hand

• If the selected hand does not move exactly to 12 o’clock, perform step 3 below to adjust it.

• The watch will return to regular timekeeping automatically if you do not perform any operation for

about two or three minutes. Any changes you have made to settings up to that point will be saved.

3. Use D (+) and B (–) to adjust the position of the currently selected hand.

• Holding down either button will cause the hand to move at high speed. Once started, high-speed

hand movement will continue even if you release the button. To stop high-speed hand movement,

press any button.

• The second hand and mode dial hand will automatically stop high-speed movement after they

complete one revolution. The minute hand will stop automatically after 12 revolutions.

4. Press A

to exit home position correction and return to regular timekeeping.

Note

After performing home position adjustment, check to make sure that the analog hands and the upper

display indicate the same time. If they do not, perform home position adjustment again.

E-22

Taking Temperature Readings

This watch uses a temperature sensor to measure temperature.

To take temperature readings

While in the Timekeeping Mode, press

•TEMP will appear in the upper display and temperature measurement

will start. After about one second, the measurement reading will

appear in the upper display.

• The watch will continue to take temperature readings every ﬁ ve

seconds for about two minutes.

• The watch will return to the Timekeeping Mode after the reading

operation is complete (about two minutes).

• Press D to restart temperature readings.

• Pressing

C while a reading operation is in progress will stop the

operation and enter the Timekeeping Mode.

Temperature

• Temperature is displayed in units of 0.1°C (or 0.2°F).

• The displayed temperature value changes to

- - - °C (or °F) if a measured temperature falls outside the

range of –10.0°C to 60.0°C (14.0°F to 140.0°F). The temperature value will reappear as soon as the

measured temperature is within the allowable range.

TemperatureTemperature

E-23

Display Units

You can select either Celsius (°C) or Fahrenheit (°F) for the displayed temperature value. See “To specify

the temperature unit” (page E-25).

Temperature Sensor Calibration

The temperature sensor built into the watch is calibrated at the factory and normally requires no further

adjustment. If you notice serious errors in the temperature readings produced by the watch, you can

calibrate the sensor to correct the errors.

Important!

• Incorrectly calibrating the temperature sensor can result in incorrect readings.

Carefully read the following before doing anything.

–

Compare the readings produced by the watch with those of another reliable and accurate thermometer.

– If adjustment is required, remove the watch from your wrist and wait for 20 or 30 minutes to give the

temperature of the watch time to stabilize.

Operation Guide 5446

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	Edifice Classic
Gewicht:	147 g
Breedte:	45.1 mm
Diepte:	13.3 mm
Hoogte:	49.6 mm
LED backlight:	Ja
Type horloge:	Horloge
Mechanismetype:	Quartz
Chronograaf:	Ja
Type wijzerplaat horloge:	Analoge wijzerplaat
Waterdicht:	Ja
Stopwatch:	Ja
Countdown timer:	Ja
Waterbestendig druk:	10 ATM
Waterbestendig diepte:	100 m
Wereldklok functie:	Ja
Alarm functie:	Ja
Agenda:	Ja
Klokmodus:	12/24 uur
Nauwkeurigheid:	15 sec/maand
Horlogekast materiaal:	Roestvrijstaal
Kleur behuizing:	Roestvrijstaal
Band materiaal:	Roestvrijstaal
Hoofdkleur van band:	Roestvrijstaal
Glas type van horloge:	Mineraalglas
Hoesvorm:	Rond
Hoofdkleur van wijzerplaat:	Zwart
Geslacht:	Man
Levensduur batterij/accu:	2 jaar
Stijl becijfering horloge:	Niet numeriek
Kleur becijfering horloge:	Zilver
Ondersteund aantal accu's/batterijen:	2
Lichtgevende wijzerplaten:	Ja
Aantal wijzers:	3
Thermometer:	Ja
Type batterij:	SR927W