Casio Collection LTP-E140G-9AEF Handleiding

Bekijk gratis de handleiding van Casio Collection LTP-E140G-9AEF (1 pagina’s), behorend tot de categorie Horloge. Deze gids werd als nuttig beoordeeld door 11 mensen. Heb je een vraag over Casio Collection LTP-E140G-9AEF of wil je andere gebruikers van dit product iets vragen? Stel een vraag

/ 1 PDF

1

Operation Guide ANALOG(MAJ)

MA1301-EA

© 2013 CASIO COMPUTER CO., LTD.

• Your watch may differ somewhat from the one shown in the illustration.

Notes

• Some water resistant models are equipped with a screw lock

crown.

• With such models, you must unscrew the crown in the direction

noted in the illustration to loosen it before you can pull it out.

Do not pull too forcibly on such crowns.

• Also note that such watches are not water resistant while their

crowns are loosened. Be sure to screw the crowns back in as

far as they will go after making any setting.

[Modules 5284, 5361, and 5364]

To set the timeCrown

1. When the second hand is at 12 o’clock, pull out the

crown to stop it.

2. Set the hands by rotating the crown. Move the

minute hand four or five minutes past the setting

you want, and then back them up to the setting.

3. Push the crown back in on a time signal to resume

timekeeping.

[Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and

5358]

To set the timeFirst click (Day setting)

Second click

(Time setting)

Crown

(Normal position)

1. When the second hand is at 12 o’clock, pull out the

crown to the second click to stop it.

2. Set the hands by rotating the crown. Move the

minute hand four or five minutes past the setting

you want, and then back them up to the setting.

3. Push the crown back in on a time signal to resume

timekeeping.

To set the day

• Avoid setting the day between 9:00 p.m. and 1:00

a.m. The day may not change in the following day

if you do.

1. Pull out the crown to the first click.

2. Set the day by rotating the crown.

3. Push the crown back in to its normal position.

[Modules 5125, 5167, 5223, 5237, 5249, and 5339]

To set the time

Crown

(Normal position)

First click

(Day, day of week setting)

Second click

(Time setting)

1. When the second hand is at 12 o’clock, pull out

the crown to the second click to stop it.

2. Set the hands by rotating the crown. Move the

minute hand four or five minutes past the setting

you want, and then back them up to the setting.

3. Push the crown back in on a time signal to resume

timekeeping.

To set the day and day of the week

• Avoid setting the day and day of the week between

9:00 p.m. and 5:00 a.m. The day and day of the

week may not change in the following day if you do.

1. Pull out the crown to the first click.

2. Set the day by rotating the crown counterclockwise.

3. Set the day of the week by rotating the crown clockwise.

4. Push the crown back in to its normal position.

• For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the mark with the

minute hand.

After certain amount of time elapsed, read the graduation on the

elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

Elapsed time bezel

Specifications

Module No.

Accuracy at normal

temperature

(per month)

Battery typeBattery life

5125/5128/5206/

5207/5237/5249/

5361

±20 secondsSR626SWApprox. 3 years

5167±20 secondsSR920SWApprox. 5 years

5180/5199/5223/

5342/5343/5358 ±20 secondsSR621SWApprox. 3 years

5218/5250±20 secondsSR616SWApprox. 2 years

5284/5364±20 secondsSR521SWApprox. 2 years

5339/5340/5341±20 secondsSR920SWApprox. 3 years

5352±20 secondsSR716SWApprox. 3 years

[Module 5364]

Low Battery Indicator:Second hand moves in 2-second increments when power is low.

Product specificaties